BEFORE YOU START
Thank you for purchasing the
PEASE READ CAREFULLY BEFORE USING THE KJM-7900 PRO
Unpacking the KJM-7900 Pro
Carefully remove the
WARNING: To avoid shock or serious injury do not attempt to connect any external devices or cablesto the
QUICK START (REAR PANEL HOOK-UP)
Connecting an Amplifier to the KJM-7900 Pro
Master 1 Out
Locate the “MASTER 1 OUT” section on the back of the
Note: you may need a special “RCA to 1/4”” connector cable if you are using an amplifier with “RCA” type jacks. Connect the “L” and “R” audio input connectors of your amplifier to the “L” and “R” 1/4” ouput jacks on the back of the unit, labeled “MASTER 1 OUT”. T he “MASTER 1 OUTPUT” section of the
Monoitor Out “L” and “R”
You can connect the “MONITOR OUT, “L and “R” section of the
mix for your vocals, by connecting them to the “L” and “R” input connectors of your external “monitor” amplifier. The “MONITOR OUT” section is controled by the “MASTER 2” slide control.
Record Out “L” and “R”
Connect the “L” and “R” “RECORD OUT” jacks to the left and right ” record in” channels on your recording device. When recordin g, set your record levels from the
Connecting a Music Source to the KJM-7900 Pro
“Source section 3” CD, Laser Disc and DVD Players (with or without a video source)
Locate the “AUDIO IN” section on the back of the
Connecting a TV Monitor
If there is a video output connector on your player, locate the “VIDEO IN” section on the back of the
2