Bosch Appliances PLE-1MEXX0-XX operation manual Back panel

Page 13

Plena Mixer AmplifierSystem Overview en 13

3.4.2

Back panel

 

 

 

 

 

 

 

 

 

 

1

2

3

4

5

6

7

8

9

10

11 12

 

Figure 3.2

Back panel

 

 

 

 

 

 

 

 

Number Description

1Microphone/line 1 input with trigger, Euro style screw terminal connector - DIP switch settings for: chime, PTT (push to talk), mic./line, speech filter, and phantom power (see number 2)

2DIP switch for microphone/line 1 and microphone/line 2 (see numbers 1 and 3 respectively)

3Microphone/line 2 input, Euro style screw terminal - DIP switch settings for speech filter, mic./line, and phantom power (see number 2)

4Microphone/line 3 input, 6.3 mm - 1/4" jack connector - DIP switch settings for mic./line, and phantom power (see number 5)

5DIP switch for microphone/line 3 and microphone/line 4 (see numbers 4 and 6 respectively)

6Microphone/line 4 input, 6.3 mm - 1/4" jack connector - DIP switch settings for mic./line, and phantom power (see number 5)

7Music input, 2x RCA/cinch connectors, Stereo, summed mono

8Cooling fan (PLE-1ME120 & PLE-1ME240)

9Outputs:

Call only, screw terminal connector 100 V

Screw terminal connector 100 V, and 4 Ohm

10Mains fuse

11Earth connection screw

12Mains connector (3-pole)

NOTICE!

The unit must be earthed.

Always allow adequate space at the rear of the unit for ventilation.

Bosch Security Systems B.V.

Installation and Operation manual

PLE-1MExx0-xx V1.0 2011.04

Image 13 Contents
Plena Mixer Amplifier Page Table of Contents Maintenance Technical Data 1Safety En Safety Plena Mixer Amplifier Plena Mixer Amplifier Safety en Short Information Imperial Metric Conversion tablesSystem Overview Contents of boxPlena product range 3The Plena Mixer Amplifier Front panel Controls, connectors and indicatorsBack panel 4Planning Check settings/connections InstallationUnpack unit Connect unit to mainsConnection Connecting inputsPriority microphone input Secondary microphone inputMusic source input 3Additional microphones inputs 3Connecting constant voltage loudspeakers Connecting outputsMain output Call onlyConnecting low impedance loudspeakers Connecting low impedance loudspeakersUnit settings ConfigurationRear panel settings Pin settings and labelingOperation Switch on and offMicrophone/line controls Music controls9Maintenance 10.1 Electrical Technical Data10.3 Environmental 10.2 Mechanical10.1.5 Music input 10.1.6 Loudspeaker output 100 V / 70Page Bosch Security Systems B.V