Bosch Appliances PLE-1MEXX0-XX Connection, Connecting inputs, Priority microphone input

16 en ConnectionPlena Mixer Amplifier

6	Connection
6.1	Connecting inputs
6.1.1	Priority microphone (input 1)

The priority microphone PLE-1CS or PLE-1SCS (or a generic call station) that can be used with push to talk (PTT) should be connected to “microphone/line 1 input”. The PTT mode can be activated by setting the DIP switch (2) at the rear of the unit. Microphone/line 1 input has priority over all other microphone/line inputs.

The microphone/line 1 input has a Euro style screw terminal connector.

The Euro style screw terminal connector has a trigger input, which can be used in combination with the Euro and XLR connector.

Figure 6.1 Euro connector with trigger

6.1.2 Secondary microphone (input 2)

Connect a secondary microphone to “microphone/line input 2”.

Set the DIP switch settings next to the connector as required. See Section 7.1 Unit settings.

PLE-1MExx0-xx V1.0 2011.04 Installation and Operation manual Bosch Security Systems B.V.