Bosch Appliances PLE-1MEXX0-XX operation manual Connecting low impedance loudspeakers

Page 19

Plena Mixer Amplifier	Connection en 19
6.2.4	Connecting low impedance loudspeakers
	Figure 6.5 Connecting low impedance loudspeakers
	Connect low impedance loudspeakers to the 4 Ohm/0 terminals. This output can deliver the
	rated output power into an 4 Ohm load. Connect multiple loudspeakers in a series/parallel-
	arrangement to make the combined impedance 4 Ohm or higher. Check the loudspeaker
	polarity for in-phase connection.

Bosch Security Systems B.V.

Installation and Operation manual

PLE-1MExx0-xx V1.0 2011.04

Image 19

Contents

Plena Mixer Amplifier Page Table of Contents Maintenance Technical Data 1Safety En Safety Plena Mixer Amplifier Plena Mixer Amplifier Safety en Short Information Imperial Metric Conversion tablesSystem Overview Contents of boxPlena product range 3The Plena Mixer Amplifier Front panel Controls, connectors and indicatorsBack panel 4Planning Connect unit to mains InstallationCheck settings/connections Unpack unitSecondary microphone input Connecting inputsConnection Priority microphone inputMusic source input 3Additional microphones inputs 3Call only Connecting outputsConnecting constant voltage loudspeakers Main outputConnecting low impedance loudspeakers Connecting low impedance loudspeakersPin settings and labeling ConfigurationUnit settings Rear panel settingsMusic controls Switch on and offOperation Microphone/line controls9Maintenance 10.1 Electrical Technical Data10.1.6 Loudspeaker output 100 V / 70 10.2 Mechanical10.3 Environmental 10.1.5 Music inputPage Bosch Security Systems B.V