Important precautions
XRM owner’s manual
1 | Save the carton and packing materials! | ||
| Should you ever need to ship the unit, | ||
| use only the original factory packing. | ||
| For replacement packaging,call Crest Audio’s | ||
| Customer Service Department directly. | ||
2 | Read all documentation before | ||
| operating your equipment. Retain all | ||
| documentation for future reference. | ||
3 | Follow all instructions printed on | ||
| unit chassis for proper operation. | ||
4 |
|
|
|
Do not use the unit if the electrical | |||
| power cord is frayed or broken. | ||
| The power supply cord should be rout- | ||
| ed so that it is not likely to be walked on | ||
| or pinched by items placed upon or | ||
| against it. | ||
5 | Always operate the unit with the | ||
| AC ground wire connected to the | ||
| electrical system ground. Precautions | ||
| should be taken so that the means of | ||
| grounding of a piece of equipment is not | ||
| defeated. | ||
6 | Damage caused by connection to | ||
| improper AC voltage is not covered | ||
| by any warranty. | ||
7 | Do not spill water or other liquids | ||
| into or on the unit, or operate the | ||
| unit while standing in liquid. | ||
8 | The power cord of equipment | ||
| should be unplugged from the out- | ||
| let when left unused for a long peri- | ||
| od of time. | ||
Service Information
Do not open unit!
Opening the unit will expose you to potentially dangerous voltages.There are no user serviceable parts inside.
Equipment should be serviced by qualified service personnel when:
A.The equipment has been exposed to rain.
B.The equipment does not appear to oper- ate normally,or exhibits a marked change in performance.
C.The equipment has been dropped, or the enclosure damaged.
To obtain service:
contact your nearest Crest Audio Service Center, Distributor, Dealer, or Crest Audio at 201.475.4600 USA or visit www.crestaudio.com for addi- tional information.
email techserve@crestaudio.com
This symbol is used to alert
the operator to follow important procedures and precautions detailed in documentation.
This symbol is used to warn opera- tors that uninsulated “dangerous voltages” are present within the equipment enclosure that may
pose a risk of electrical shock.