Sharp HT-SL50 operation manual Specifications, Soundbar speaker

Specifications

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production unit. There maybe some deviations from these values in individual unit.

■ General

Power source	AC 220 - 240 V ~ 50/60 Hz
Power	Power On: 25 W
consumption	Power Stand-by: Below 1 W
Output power	RMS: Total 100 watts
	RMS:
	Front Left/Right:
	RMS: 50W (25W + 25W) (10% T.H.D.)
	RMS: 48W (24W + 24W) (1% T.H.D.)
	Subwoofer:
	RMS: 50W (10% T.H.D.)
	RMS: 50W (1% T.H.D.)
Output	HDMI™ (ver 1.4 with ARC) output:
terminal	(audio/video support to 1080p) x 1
Input	Analogue input (Audio in):
terminal	Stereo mini socket Ø 3.5 mm
	HDMI input: (audio/ video support to
	1080p) x 1

■Soundbar speaker

Type	Full Range speaker system
	2.2 x 11.5 cm (7/8" x 4-1/2")
	Full Range
Maximum	50 W/CH
input power
Rated input	25 W/CH
power
Impedance	4 ohms/CH (3 pieces parallel)
Dimensions	Width: 801 mm (31-1/2")
	Height: 26 mm (1-1/16")
	Depth: 50 mm (2")
Weight	0.66 kg (1.46 lbs.)

■Subwoofer

Type	Subwoofer system
	16 cm (6 - 5/16") woofer
Maximum	100 W
input power
Rated input	50 W
power
Impedance	8 ohms
Dimensions	Width: 115 mm (4 - 1/2")
	Height: 422 mm (16 - 5/8")
	Depth: 307 mm (12 - 1/16")
Weight	4.50 kg (9.92 lbs.)

E-12