Euphonix MC Control manual User Guide, Communications and Safety Regulation Information

Page 2

USER GUIDE

ii

professional control surface

In the interest of continued product development, Euphonix reserves the right to make improvements to this manual and the product it describes at any time, without notice or obligation.

MC Mix, MC Control, MC Pro, System 5-MC, and EuCon are trademarks of Euphonix, Inc.

©2008 Euphonix, Inc. All rights reserved worldwide. No part of this publication may be reproduced, trans- mitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without written permission from Euphonix, Inc.

Communications and Safety Regulation Information

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener- ates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip- ment does cause harmful interference to radio or television reception, which can be deter- mined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

•Reorient or locate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Modifications made to the product, unless expressly approved by Euphonix, Inc., could void the user's authority to operate the equipment.

Always use a shielded Ethernet cable to connect to your MC Control, such as the one supplied in with the unit.

DECLARATION OF CONFORMITY

We Euphonix, Inc.,

220 Portage Ave

Palo Alto, CA, 94306 USA

(650) 846-1173

declare under our sole responsibility that the product

MC Control

complies(y) with Part 15 of FCC Rules.

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undes- ired operation.

Artist Series

Page 1 Page 3
Image 2
Page 1 Page 3
Contents User Guide Communications and Safety Regulation Information User GuideJapan CanadaEuropean Union Australia Important Safety Instructions User Guide Page Table of Contents Viii User Guide Page List of Figures Xii Introduction to the Artist EuControl SoftwareConventions Used in this User Guide Setting Up the MC Control Elevating the MC ControlPhysically Linking Artist Devices 2Removing side panels left removing riser brackets3Removing screws from the bottom panel Installation 6Menu bar with EuControl icon8Ethernet cable and rear panel jack Controlling a Second Workstation Connecting a Footswitch 10 Footswitch input on rear panelPage Common Tasks Common Tasks Fader StripInserts Add a plug-in on track 1 of your applicationTransport Keys and Jog Wheel 3Jog Wheel, transport keys, and bottom-right Shift keySurface Controls Power Switch Shift Key2 on Fader StripsFader Solo 4 SELNavigation Controls Bank and NudgeApplication Knob Set Selection KnobsNavigating Among Multiple Artist Devices MIX Knob Functions Knob Set Navigation KeysConfiguration Pages CFG BackSoft Keys Soft KeysJog Wheel and Transport Controls Jog Wheel FunctionsTransport Controls REWControl ROOM/MONITOR Knob Touchscreen and Controls Tracks View Track ViewSoft Key View 3Soft Key ViewSetup Screens Control Room5Setup Monitor MonitorPage EuControl EuControlMy Surfaces SurfacesAll Surfaces Remove Update FirmwareAdd B Control unit banks independentlyMy Workstations WorkstationsAll Workstations Attach/Detach General Open plug-ins on workstation when editingClose plug-ins on workstation when editing Workstation tracks knob set changesDisplay track numbers on surface Solo ModeAuto-bank to selected track MC Mix display screen dim time FootswitchPreferences Status MC Control DisplayOperation Assign Assign tabClear All Assignments Display application’s track numbersLock to application Store LayoutsRecall ClearAppendix a Setting the IP Address User Guide
Related manuals
Manual 28 pages 23.04 Kb

MC Control specifications

The Euphonix MC Control is a sophisticated control surface designed for professional audio and video editing, offering seamless integration with popular software applications. Its primary goal is to enhance workflow efficiency, allowing users to manipulate projects with ease and precision.

At the heart of the MC Control is its eight touch-sensitive faders, each equipped with a motorized design. These faders provide real-time feedback, enabling users to make nuanced adjustments to mixing levels while maintaining a tactile and responsive feel. This feature is particularly beneficial for audio engineers and music producers who require accurate control over their mixes.

The MC Control also boasts a set of programmable knobs and buttons, offering customizable options for controlling various parameters within software applications. This functionality allows users to tailor the control surface to their specific needs, enhancing productivity and usability. With its intuitive layout, users can quickly familiarize themselves with the functionalities, making it a great asset in high-pressure environments where time is of the essence.

Another remarkable aspect of the Euphonix MC Control is its compatibility with a range of Digital Audio Workstations (DAWs) and video editing software. It utilizes EUCON technology, a high-speed network protocol that ensures a tight integration with applications such as Pro Tools, Logic Pro, and Final Cut Pro. This feature enables users to take advantage of advanced functions and features within their chosen software, transforming their editing and mixing experience.

In addition to its robust hardware features, the MC Control is designed with a sleek, modern aesthetic that can fit into any professional studio setting. Its compact form factor makes it highly portable, allowing for easy relocation between setups when necessary.

The Euphonix MC Control is not just a control surface; it's a versatile tool that bridges the gap between the digital and analog worlds, providing a hands-on approach to managing complex projects. Its blend of advanced technology, ergonomic design, and customizable functionality makes it a standout choice for industry professionals who demand the best from their equipment. Whether you’re mixing a music album or editing a film, the Euphonix MC Control enhances your performance and creativity, making it an invaluable asset in the world of content creation.
Top Page Image Contents