Harrison Labs V2.0.2 manual Inserts, Outputs, Inputs

12.0 Redirects: Plug-ins, Sends & Inserts

Inserts

An Insert incorporates a Jack "send" output and a Jack "return" input. The Insert send/return allows the audio signal to be routed out of a channel and back into it, after performing some external processing. Inserts are often used to "patch in" a piece of outboard gear that is not available as a plug-in.

%Note: Inserts are created "deactivated", you must Activate the insert before it will work.

•Measure Latency: Once your insert is connected to a Jack-aware program, or an external piece of gear, then click this button to measure the latency. If the Insert is used on a track or Mix Bus, this delay will be accommo- dated automatically.

Outputs

•Add/Remove: adds/removes a Jack port to the insert "send".

•Disconnect All: disconnects all Jack sending ports (does not remove ports)

•Available connections: This is a list of all the available Jack connection ports, with one tab for each Jack appli- cation, and one for the system sound I/O ("system").

Inputs

•Add/Remove: adds/removes a Jack port to the insert "return".

•Disconnect All: disconnects all Jack return ports (does not remove ports)

•Available connections: This is a list of all the available Jack connection ports, with one tab for each Jack appli- cation, and one for the system sound I/O ("system").

Section 12.0 - Redirects: Plug-ins, Sends & Inserts 23 Mixbus User Guide