You should now see a ‘fuzzy’ video picture on your monitor connected to the XR receiver unit.
STEP 3
You may now use the following keys to select the required video compensation.
gSelects no video compensation.
{Increases the video compensation (coarse adjustment).
wIncreases the video compensation (fine adjustment).
}Decreases the video compensation (coarse adjustment).
yDecreases the video compensation (fine adjustment).
Various other keys may also be used to select operating options (see section 2.10)
As you change the video compensation setting you will see the sharpness of the picture change. The AdderLink calculates the required brightness automatically. You will need more video compensation for longer twisted pair cable distances. Adjust the video compensation until you achieve the best picture. If you add too much compensation then the picture may be lost. If this happens reduce the compensation to restore the picture.
AdderLink | Installation and Use | Page 25 |