Controls and Features | American Audio Q-D3 guide

Q-D3™

Controls and Features Cont.

26.REC OUT - This is a low current unbalanced output source designed for various tape and CD recorders. The Record Out (REC OUT) level is dictated by the Channel Fader Level (3), it is not inﬂ u- enced by the Master Volume Control (13).

27.CHANNEL 2: LINE 2 RCA INPUT JACKS - These Jacks are used for line level inputs. Connect CD players or Tape Decks to LINE inputs. Line level musical instruments with stereo outputs such as Rhythm Machines or Samplers should also be connected to LINE inputs. Turntables should only be connected to “Phono” inputs. The red colored RCA jack represents the right channel input and the white represents the left channel input.

28.CHANNEL 2: PHONO 2 INPUT/AUX 2 JACKS - The type of input must directly reﬂ ect the selected mode of the Line Level Selector Switch (29). Connect turntables equipped with MM pickup cartridge to PHONO inputs (All DJ turntable use MM pick-up cartridges). CD players or Tape Decks and other line level instruments may be connected to these jacks as long as the Line Level Selector Switch (29) is in the “AUX 2” position. The red colored RCA jack represents the right channel input and the white represents the left channel input.

29.LINE LEVEL SELECTOR SWITCH - This switch is used to change the mode of PHONO INPUT JACKS (28 and 31). When connecting turntable to these jacks be sure the switch is in the PHONO posi- tion, and when using line level input devices be sure this switch is in the AUX position. Always be sure main power is shut off before change the position of the Line Level Selector Switch.

30.CHANNEL 1: LINE 1 RCA INPUT JACKS - These Jacks are used for line level inputs. Connect CD players or Tape Decks to LINE inputs. Line level musical instruments with stereo outputs such as Rhythm Machines or Samplers should also be connected to LINE inputs. Turntables should only be connected to “Phono” inputs. The red colored RCA jack represents the right channel input and the white represents the left channel input.

31.CHANNEL 1: PHONO 1 INPUT/AUX 1 JACKS - The type of input must directly reﬂ ect the selected mode of the Line Level Selector Switch (29). Connect turntables equipped with MM pickup cartridge to PHONO inputs (All DJ turntable use MM pick-up cartridges). CD players or Tape Decks and other line level instruments may be connected to these jacks as long as the Line Level Selector Switch (29) is in the “AUX 1” position. The red colored RCA jack represents the right channel input and the white represents the left channel input.

32.GND (GROUND TERMINAL) - Connect each of your turntables ground leads to either of the two ground terminal. This will reduce the humming and popping noises associated with magnetic phono cartridges.