StudioTech 233 manual Operating Modes, Main Output Button Mode

Page 22

control, located on the far right, will be used to adjust its level.

There is one limitation related to the head- phone output mode. It’s the fact that the output will be 2-channel monaural. What- ever signal is present on the headphone output’s left channel will also be present on the right channel. (The exception is if the right-channel output is disabled.) A stereo headphone mix can’t be created. But in most cases this limitation won’t overshadow the benefit of being able to create the mix. For signal-flow clarification please review the block diagram located at the end of this user guide.

Operating Modes

The sixteen switches associated with switch assemblies SW3 and SW4 are used to configure the Model 233’s operat- ing modes. Technically, these switches “talk” to the microcontroller integrated circuit and associated software that give the Model 233 its “smarts.” The software has been carefully designed to provide a number of different ways in which the unit can function. It’s critical to carefully review the available options and choose the ones that best meet the needs of a specific application. Note that switches can be changed even while the Model 233 is powered up and operating. The unit’s operating characteristics will change in “real-time” in response to configuration changes.

In addition to the switch assemblies SW3 and SW4, the last two positions of switch assembly SW2 are used for configuration. Specifically, SW2-11 and SW2-12 are used for the talkback to intercom functions.

Main Output Button Mode

Switches SW3-1 and SW3-2 configure how the main output button functions.

Figure 8. Main output button mode settings

There are four available modes:

Push to mute: In this mode the main output is normally active. The main output will mute whenever the button is pressed and held. This is the “cough” mode typically used for on-air sports broadcasting applications.

Push to talk: In this mode the main out- put is normally muted. The main output will become active whenever the button is pressed and held.

Alternate action: In this mode the main output will change between its active and muted state whenever the button is pressed. Upon power up the main output will be in its muted state.

Hybrid: This mode is a combination of push to talk and alternate action. It’s similar to the way talk buttons function on user stations associated with broad- cast and production intercom systems. If the button is pressed and held, the main output will become active until the button is released. If the button is mo- mentarily “tapped” the main output will change state. Upon power up the main output will be in its muted state.

Issue 1, September 2007

Model 233 User Guide

Page 22

Studio Technologies, Inc.

Image 22
Contents User Guide This page intentionally left blank Table of Contents Issue 1, September Model 233 User Guide What This User Guide Covers IntroductionSystem Overview Main Output System FeaturesMicrophone Input Talkback FunctionsDynamic Range Control User Controls and Status IndicatorsFlexibility Cue Sources SidetoneHeadphone Output Audio Quality and Protection Power SourcesIntercom Interface Auxiliary RelayAdditional Connector Locations ConfigurationConnectors Multi-Pin Headset ConnectorsOptions Installation and SetupSystem Components Headphone Output Line-Level Talkback Outputs Line Inputs External Power Input Configuration Pushbutton LabelingMicrophone Preamplifier Gain and Phantom Power Microphone Preamplifier GainPhantom Power On/Off Headphone Source SelectionLeft and right channel headphone source selection settings Headphone Output Mode Headphone output mode settingsMain Output Button Mode Operating ModesTalkback 2 Button Mode Talkback 1 Button ModeTalkback 1 Button Function Talkback 2 Button Function Sidetone ModeMain Output Source Reverse Left/Right Mode Dual-Channel or Stereo ModeHeadphone Output Operating Modes Minimum Level Mode Main Button ModeRelay Mode System ModeOperation Talkback 1 to Intercom Function ModeTalkback 2 to Intercom Function Mode ConclusionMain Output Button and LED Indicators Pushbutton Switches and Status LEDsMain Output Button Modes Talkback 1 Button Modes Talkback 1 Button and LED IndicatorTalkback 2 Button and LED Indicator Talkback Output 2 Button ModesLevel/Level Mode Level/Balance ModeMonaural Headphone Output Level Control Operation Sidetone OperationAdjusting the Line Input Trim Pots Advanced OperationTechnical Notes Intercom Interface Sidetone AdjustmentGrounding and Shielding Intercom Channel Crosstalk Intercom Audio LevelsConnecting an IFB Circuit Phantom Power External Power SourcesSymptoms of Insufficient Power LED Colors Additional ConnectorsTravel Case Issue 1, September Model 233 User Guide Pushbutton Backlighting Remote Control/Tally Connections P18Compressor Circuit P19Specifications General AudioAppendix a