Talkback 1 Button Mode
Switch
Figure 9. Talkback 1 button mode settings
Two modes are available:
•Push to talk: In this mode the talkback 1 button is normally off. The function becomes active whenever the button is pressed and held.
•Hybrid: This mode is a combination of push to talk and alternate action. If the button is pressed and held, the talkback 1 button will become active until the button is released. If the button is mo- mentarily “tapped” the state will change. Upon power up the talkback 1 button will be in its off state.
Talkback 2 Button Mode
Switch
Figure 10. Talkback 2 button mode settings
Two modes are available:
•Push to talk: In this mode the talkback 2 button function is normally off. The func- tion will become active whenever the button is pressed and held.
•Hybrid: This mode is a combination of push to talk and alternate action. If the button is pressed and held, the talkback 2 button will become active until the button is released. If the button is mo- mentarily “tapped” the state will change. Upon power up the talkback 2 button will be in its off state.
Talkback 1 Button Function
Switch
Figure 11. Talkback 1 function mode settings
Two modes are available:
•Disabled: In this mode the talkback 1 button is disabled. The talkback 1 line- level output and, if configured, talkback to intercom pin 2 function, will never be active. An exception is if the auxiliary relay is configured to follow the status of the talkback 1 button. In this case the talkback 1 button will only control the relay.
•Enabled: In this mode the talkback 1 button will operate normally. Whenever the button is active the
Model 233 User Guide | Issue 1, September 2007 |
Studio Technologies, Inc. | Page 23 |