TP-Link RX-7-248 instruction manual Program Module, Phones Module, Talkback Module

Page 6

PROGRAM MODULE

1.Group 1, 2, 3 and 4 controls pick up the signal from the four group out busses and assign them to the program output. The program output is therefore suitable for feeding the signal to the house sound system.

2.Program On/Off pushbutton determines whether the individual program output signal is to be fed to the rest of the sound system or other equipment.

3.Peak indicator for detecting overload condition.

4.Program channel mixed signal can be monitored through headphones by phones selector switches (L and/or R) prior to feeding the signal to the rest of the sound system or other equipment.

PHONES MODULE

1.Foldback 1 or 2, Echo 1 or 2, Program L and R, Air Monitor L and R can be monitored through headphones by a cluster of selection switches.

2.Air Monitor L and R inputs are provided with PHANTOM power ON/OFF switch.

3.L and R monitor output jacks are located on the rear for monitor loudspeakers (power amplifiers).

TALKBACK MODULE

1.Oscillator/Pink noise Generator includes 400Hz, 1kHz and 10kHz sine wave signals and pink noise for signal tracing, tape machine alignment, sound system setup or trouble shooting purposes.

2.These signals can be fed to all mixing busses except the cue buss.

— 5 —

Image 6
Contents TOA Mixing Console Contents Precautions General Description Features Input ModuleGROUP/FOLDBACK and GROUP/ECHO Modules Program Module Phones ModuleTalkback Module Specifications & Characteristics General Specifications RX-7-164, RX-7-248 and RX-7-328RX-7 Output Characteristics Input & Output SpecificationsRX-7 Input Characteristics Power Supply Unit RPS-7 SpecificationsLevel Diagrams Characteristics Diagrams Equalizer CurvesInput Module IPM-7 Page Group/Foldback Module GFM-7 LOWGroup/Echo Module GEM-7 Program Module PGM-7 Program OUT a SectionPhones Module PHM-7 Talkback Module TBM-7 Power Supply Module PSM-7 Meter Panel RXM-7-25, RXM-7-35, RXM-7-43 Group I/Program 1 VU MeterVU meter selector switch Cue or Talkback Meter Panel RXM-7-35 Meter Panel RXM-7-43 DC output connector Power Supply Unit RPS-7Pilot Lamp Power Switch AC FuseDifference between Professional and HI-FI type equipment General Information on using the mixing consoleImpedance Balanced type and unbalanced typeGround loops Phantom Power Switch Phase SwitchFunction Details Input Level Switch & Trim Control Equalization Chart EqualizersInstrument Equalization Chart Group/Foldback, Group/Echo Modules Equalizer IN/OUT SwitchFoldback 1, 2 and Echo 1 Program ModuleRX-7 Signal Flow Power Supply Module Phantom Power Master SwitchAir Monitor Ceiling Microphones Mic Setting Connection ExamplePortable Entertainment Sound Reinforcement Set-Up Accessory Send on each input channel also available Multi-Track Recording or Track-DownModule Replacement How to remove modulesUse fingers to lift up the module Dimensional Diagrams RX-7-164 AppearanceRX-7-248 Appearance RX-7-328 Appearance Group/Echo Modules GEM-7RXM-7-25 Appearance Bus Chassis Wood Side PanelRXM-7-35 Appearance RXM-7-43 Appearance RPS-7 Appearance Block Diagram 133-02-476-20