Texas Instruments manual Quick Start, ±2. Typical TPA0242 EVM Jumper Settings

Chapter 2

Quick Start

The steps in this chapter can be followed to quickly prepare the TPA0242 audio amplifier EVM for use. Using the TPA0242 with the TI plug-n-play audio amplifier evaluation platform is a quick and easy way to connect power, signal and control inputs, and signal outputs to the EVM using standard connectors. However, the audio amplifier evaluation module can be used stand-alone by making connections directly to the module pins, and can be wired directly into existing circuits or equipment.

The platform switch and jumper settings shown in Table 2±1 are typical for the TPA0242 EVM and will cause the TPA0242 to switch to single-ended output mode when a plug is inserted into platform headphone jack J10.

Table 2±1. Typical TI Plug-N-Play Platform Jumper and Switch Settings for the TPA0242

EVM	JP6	JP7	JP8	S2	S3
P-N-P Platform	Mode	X	Hi	Note 2	U2±U4
Notes: 1) X = Don't care

2)Set S2 to ON when signal conditioning board is installed in U1; set S2 to OFF when no signal conditioning board is installed.

Table 2±2. Typical TPA0242 EVM Jumper Settings

EVM	S3
TPA0242	OFF
Note: ON = Shunt installed
OFF = Open

Topic		Page
2.1	Precautions	. . 2±2
2.2	Quick Start List for Platform	. . 2±3
2.3	Quick Start List for Stand-Alone	. . 2±5

Quick Start 2-1