Roland RD-300SX owner manual Press SPLIT, getting the indicator to light, Keyboard’s Split Point p

Performing with the Keyboard

Playing Different Tones in Two Different Sections of the Keyboard ([SPLIT])

Such a division of the keyboard into right- and left-hand sections is called a “Split,” and the key where the division takes place is called the “Split Point.” The split-point key is included in the LOWER section.

The Split Point has been set at the factory to “B3.”

You can change the split point.

Please refer to “Changing the

Keyboard’s Split Point” (p.

23).

fig.01-10

1, 2

1

Press [SPLIT], getting the indicator to light.

[LOWER SELECT] lights.

Try fingering the keyboard.

The UPPER tone plays in the right-hand section of the keyboard, and the LOWER tone plays in the left-hand section.

fig.01-12

Split Point (B3)

LOWER UPPER

2

To exit Split mode, press [SPLIT] once more, and the indicator light goes out.

“Changing the Tone for a Zone” (p. 24)

“Adjust the Volume Level for Individual Zones (ZONE LEVEL sliders)” (p. 24)

22