Roland RD-300SX owner manual Part On/Off Part, Setting the Pan, Turning Each Controller On and Off

Page 43

Changing the pitch of the tone in semitone steps (Key Transpose)

Value

-48—0— 48

Setting the Pan

The Pan setting localizes the sound image of each part when the output is in stereo. With an increase in the value for L, more of the sound will be heard as coming from the left side. Similarly, more of the sound will originate at the right if the value of R is increased. When set to 0, the sound is heard as coming from the center.

Value

L64–0–R63

Turning Each Controller On and Off

These settings determine whether each individual part is controlled (ON), or not (OFF) by the pedals connected to each PEDAL jack (DAMPER, CONTROL), the Modulation lever, and the Bender.

Parameter	Value

Damper Pedal Switch	OFF, ON
Control Pedal Switch
Pitch Bender Switch
Modulation Switch

Settings for Each Function ([EDIT])

Part On/Off (Part)

You can choose whether or not to have messages from external MIDI devices be received by each individual part.

1.Press [EDIT].

The indicator lights, and the RD-300SX switches to Edit mode.

2.Press [INC] or [DEC] to select “Part,” then press [ENTER].

fig.disp.Prt

3.Referring to the following, press the TONE SELECT button to which the part number you want to change is assigned.

Press [LOWER SELECT] so that the indicator lights to select Part 9–16.

The channel number appears in the display while the button is held down. When the button is released, the status of the channel (on/off) is shown in the display.

TONE SELECT	Part	Part
button	LOWER SELECT=OFF	LOWER SELECT=ON

PIANO	1	9
E.PIANO	2	10
ORGAN	3	11
STRINGS/PAD	4	12
GUITAR/BASS	5	13
BRASS/WINDS	6	14
VOICE/SYNTH	7	15
RHY/GM2	8	16

4.Press [INC] or [DEC] to switch the setting to ON or OFF.

The indicator for the currently selected part flashes, while the indicator for a part that is ON lights steadily.

5.Press [EDIT] to turn off the indicator and quit editing.

You can return to Step 2 by pressing [EXIT].

On the RD-300SX, UPPER is fixed as Part 1 (Ch 1), while LOWER is fixed as Part 2 (Ch 2). Note that the keyboard won’t produce sound if Parts 1 and 2 are set to OFF.

43

Image 43

Contents 201a Do not open or modify in any way the unit or its AC adaptor Protect the unit from strong impact. Do not drop it Important Notes Contents Contents Connecting External Midi DevicesAbout V-LINK 220 Main Features Front Panel Panel DescriptionsPanel Descriptions Rear PanelBefore you begin making connections, confirm the following Connect the supplied power cord to the supplied AC adaptorGetting Ready Making ConnectionsConnecting Pedals Connecting the RD-300SX to External EquipmentTurning On the Power Turning the Power On and OffPress the Power switch on the back of the unit Turning Off the Power Adjusting the VolumeAdjust the volume using the Volume slider Tuning to Other Instruments’ Pitches Master Tune Basic Operation of the RD- 300SX Overview of the RD-300SXBasic Organization of the RD-300SX Units of SoundTo stop a song while it is playing, press ONE Touch Piano Listening to the Demo Demo PlaySong Name Composer/Copyright Hold down Edit and press WritePiano Performances ONE Touch Piano Performing with the KeyboardPress ONE Touch Piano Tone Select button for the selected category lights Performing with a Variety of TonesPressing ONE Touch Piano Switching to Single ModeTurning Dual or Split off turning the indicator off Playing Multiple Tones with the KeyboardPressing Two Tone Select buttons Simultaneously Press DUAL, getting the indicator to lightPress Dual once more, and the indicator light goes out Performing with Two Layered Tones DualKeyboard’s Split Point p Press SPLIT, getting the indicator to lightHold down Split for several seconds Changing the Keyboard’s Split PointChanging the Tone for a Zone Pitch of the tone in semitone Steps Key Transpose p Transposing the Key of the Keyboard TransposeHold down Transpose for several seconds Hold down Transpose and press a keyHold down Shift and press Lower Select Changing the Velocity When the Key Touch Is Set to FixedPress SHIFT, and the indicator light goes out Changing the Keyboard’s TouchChanging the Depth of Reverb Effect Reverb Depth Press REVERB, getting its indicator to lightAdding Reverberation to Sounds Reverb Changing the Reverb Effect TypeHold down Multi Effects and press INC or DEC Press Multi EFFECTS, getting its indicator to lightAdding a Variety Effects to the Sound Multi Effects Changing the Depth of EffectPress Organ and select the organ tone Changing the Multi-effects TypeAdding a Spinning Sound to Organ Tones Rotary Effect While holding down SHIFT, press Multi EffectsMaking a More Consistent Sound Sound Control Turn the Equalizer knobs to adjust the levels in each range Pattern List p Press Rhythm to make the button indicator lightPlaying Rhythm Rhythm Changing the Rhythm PatternChanging Rhythm Tempos Changing the Rhythm VolumeSetup List p Selecting Stored Settings SetupPress SETUP, getting the indicator to light Press INC or DEC, or Tone Select buttons to select a SetupWhen Enter is pressed, saving of the Setup begins Storing Settings to Setups WriteSettings Not Saved in a Setup Press WRITE, getting the indicator to lightDisabling the Buttons Panel Lock Press ONE Touch Piano or Exit to cancel Panel LockWhile holding down EDIT, press Enter Parameters That Can Be Set Settings for Each Function EditMaking System Settings System How to Make SettingsSelecting the Keynote Tuning to Other Instruments’ Pitches Master TuningAdjusting the Tuning Temperament, Key Switching the Pedal’s Polarity Damper Pedal PolarityIndication Value Description Switching the Pedal’s Polarity Control Pedal PolarityUsing the Pedal to Switch Setup Setup Pedal Shift Making the Settings for the USB DriverPress INC or DEC to select Common, then press Setup-Related Settings CommonSetting the Zone to which Multi Effects are Added MFX Zone Changing the Pedal Function Control Pedal FunctionPress INC or DEC to select Tone, then press Enter Tone Settings Tone ParameterParameter Value Description Changing the Bend Range Bend Range Changing the Pitch Fine TunePress INC or DEC to select U-L, then press Enter Part On/Off Part Setting the PanTurning Each Controller On and Off Bulk Dump Temporary Utility Settings UtilityTransferring Setups to External Devices Setup Bulk Dump Bulk Dump SetupPress Organ Restoring Saved Settings to the RD- 300SXPress Enter again to start the Factory Reset operation Transmit play back the data from the external sequencerSwitching Local Control On and Off Setting the Midi Tx ModeIndication Using the RD-300SX As a Master Keyboard Connecting External Midi DevicesWhat’s MIDI? Recording the Performance Connecting to an External SequencerSettings for Recording Connecting External Midi DevicesNumber Bank Select Program Change Switching SetupsSelecting RD-300SX Sounds from an External Midi Device Making ConnectionsAgain Switching USB DriversExchanging Midi Messages with Your Computer Press INC or DEC to set the value Display Value DescriptionHold down Shift and press Sound Control once again to exit How to Use the V-LINKAbout V-LINK Hold down Shift and press Sound ControlProblem Check/Solution TroubleshootingKeyboard is Played TroubleshootingWhen listening through speakers When listening through headphonesEffect name Overview Effects ListSPACE-D Effects List3TAP PAN Sympathetic Display Meaning Error MessagesTone Name Tone ListTone List 106 Rhythm Set ListRhythm Set List GM2 Standard GM2 Room GM2 Power GM2 ElectricGM2 Analog GM2 Jazz GM2 Brush GM2 Orchstra GM2 SFX Rhythm Pattern Rhythm Pattern ListWhat to do Operation Setup ListSelecting Stored Settings Setup p Shortcut ListMidi Implementation Chart Midi Implementation ChartConnectors Main SpecificationsKEY Touch IndexRhythm IndexFor the USA Compliance Information StatementFor the U.K For EU CountriesInformation