Troubleshooting, To use washer again | Whirlpool 3RLSQ8033 guide

Vacation, Storage and Moving Care

Install and store your washer where it will not freeze. Because some water may stay in the hoses, freezing can damage your washer. If storing or moving your washer during freezing weather, winterize it.

To use washer again

1.Flush water pipes and hoses. Reconnect water inlet hoses. Turn on both water faucets.

Non-use or vacation care

Operate your washer only when you are at home. If you will be on vacation or not using your washer for an extended period of time, you should:

■Unplug washer or disconnect power.

■Turn off the water supply to the washer. This helps avoid accidental flooding (due to a water pressure surge) while you are away.

To winterize washer

1.Shut off both water faucets.

2.Disconnect and drain water inlet hoses.

3.Put 1 qt (1 L) of R.V.-type antifreeze in the basket.

4.Run washer on a drain and spin setting (see “Drain and Spin”) for about 30 seconds to mix the antifreeze and water.

5.Unplug washer or disconnect power.

WARNING

Electrical Shock Hazard

Plug into a grounded (earthed) outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

2.Plug in washer or reconnect power.

3.Run the washer through a complete cycle with 1 cup (250 mL) of detergent to clean out antifreeze.

TROUBLESHOOTING

First try the solutions suggested here and possibly avoid the cost of a service call...

Washer won’t fill, rinse or agitate; washer stops

WARNING

Electrical Shock Hazard

Plug into a grounded (earthed) outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

■Is the power cord plugged into an earthed 3 prong outlet? Plug power cord into an earthed 3 prong outlet.

■Are you using an extension cord? Do not use an extension cord.

■Is the indicator on the Cycle Control knob properly lined up with a cycle? Turn the Cycle Control knob to the right slightly and pull to start.

■Are the water inlet valve screens clogged? Turn off the water and remove inlet hoses from the washer. Remove any accumulated film or particles. Reinstall hoses, turn on water and check for leaks.

■Are both the hot and cold water faucets turned on? Turn on the water.

■Is the water inlet hose kinked? Straighten the hoses.

■Does the water level seem too low, or does the washer appear to not fill completely? The top of the agitator is much higher than the highest water level. This creates a perception that the washer is not filling completely. This is normal.

■Has a household fuse blown or has a circuit breaker tripped? Replace the fuse, or reset the circuit breaker. If the problem continues, call an electrician.

■Is the washer in a normal pause in the Synthetics/ Permanent Press (or Hand Washables) cycle?

The washer pauses for about 2 minutes in the Synthetics/ Permanent Press cycle. Allow the cycle to continue.

The Hand Washables cycle (on some models) features periods of agitation and soak.

■Is the washer overloaded? Wash smaller loads.

■Is the lid open? The lid must be closed during operation. Washer will not agitate or spin with the lid open.

3RLSQ8033 specifications

The Whirlpool 3RLSQ8033 is a modern refrigerator that embodies the perfect blend of style, efficiency, and innovative technology. Designed with the concrete needs of families in mind, this refrigerator is a standout in its category, offering both aesthetic appeal and practical functionality.

One of the most notable features of the Whirlpool 3RLSQ8033 is its spacious dual-door design. With a generous storage capacity, this appliance allows you to organize your groceries with ease. The adjustable shelves and deep door bins provide flexibility in storing items of various sizes, ensuring that nothing goes to waste. The crisper drawers are designed to keep fruits and vegetables fresh for longer, maintaining optimal humidity levels that cater to the unique needs of different produce types.

In terms of technological advancements, the Whirlpool 3RLSQ8033 is equipped with the company's renowned FreshFlow Technology. This system includes advanced air filtration and temperature management features designed to enhance food preservation. The air filter works to reduce odor and maintain a balanced environment within the fridge, while the intuitive cooling system ensures even temperature distribution, eliminating spots that could lead to premature spoilage.

Energy efficiency is another key characteristic of the 3RLSQ8033. The appliance is designed to consume less power without compromising performance. With its eco-friendly operations, it contributes to reduced energy bills and a smaller carbon footprint, making it a suitable choice for environmentally conscious consumers.

Moreover, the Whirlpool 3RLSQ8033 comes with a sleek and modern exterior, available in a variety of colors to fit any kitchen décor. The stainless steel finish not only adds elegance but is also resistant to fingerprints, making maintenance easier. The LED lighting inside illuminates the interior brightly, allowing for easy visibility of all stored items, even in low light conditions.

In summary, the Whirlpool 3RLSQ8033 is designed to meet the diverse needs of modern households. Its combination of spacious design, innovative features, energy efficiency, and stylish aesthetics make it an attractive addition to any home. Whether you are storing everyday essentials or planning for a big family meal, this refrigerator is equipped to handle it all with ease and sophistication. It stands out as an excellent investment for those looking to enhance their kitchen with a reliable and efficient refrigeration solution.