CONNECTING AN EXTERNAL UNIT
You can connect an external unit to this unit, such as a CD/CD+G player, etc. Simply connect an audio cable (not included) from the Audio Input jacks on this unit to the external unit's AUX OUT jacks. This will allow you to broadcast the external unit's sound through this unit’s speakers. Make sure both units are turned on and adjust the volume using the Master Volume control.
NOTES:
• Connecting the unit to an external audio source will allow you to broad cast the exte rnal unit’s sound through this unit’s speakers.
• When connecting the external unit, refer to the owner’s manual of the external unit, as well as this manual.
• When connecting the external unit, make sure the power is off and both units are unplug ged before making any connections.
• Connect a CD+G player to utilize the Auto VOCAL button, see the following page.
• The Line in cable cannot be connected when the Audio In cable is connected.
USING A MULTIMEDIA PLAYER
OR
Insert your multimedia player into the Multimedia Player Holder. Fish the included Line In Cable from the rear of the unit and into the side or top of the Multimedia Player Holder as shown.
Connect the Line In Cable from the LINE OUT of your multimedia player to the MEDIA IN jack on the top of the amp.
Connecting the multimedia player will allow you to hear its sound through this unit’s speakers.
9