Peavey PCX-U302 manual Operation Instructions

Page 10

4.OPERATION INSTRUCTIONS

1.Turn the volume controls of the receiver and device in use to a minimum setting before turning on the microphone transmitter. After the receivers power switch is set to the on position, the power switch’s red indicator illuminates to denote normal power status.

2.If the SIGNAL LED indicators of the receiver are illuminated before switching on the microphone or transmitter, it indicates the receiver is receiving interference signals. The more LEDs that illuminate the more severity of interference. This system has “Pilotone” and “NoiseLock” dual-squelch features so noise output will not occur. If multiple channels are used and both SIGNAL and AUDIO LEDs illuminate before the transmitter is turned on, simply adjust the Squelch controls clockwise until the AUDIO signal indicators extinguish. (Figure 9). However, by adjusting the squelch controls it affects the sensitivity level of the receiver, therefore, shortening the operating distance and decreasing the stability.

Figure 9

3.Under normal circumstances, the SIGNAL indicator lights up when a microphone or transmitter is turned on near the receiver to indicate the receiver is ready for normal operation. Once sounds enter into the microphone the AUDIO LED indicators will

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents PLL True Diversityi Page True Diversity Receiver Unit Features and FunctionsIntroduction Front PanelChannel Indicator Antenna Input Connector a Power Switch and IndicatorGroup Indicator RF Signal Level IndicatorSquelch Adjustment Antenna Input Connector B Rear PanelUnbalanced Level Switch Installation of the ReceiverAudio Output Connection Unbalanced OutputBalanced Output Setup for Dual HALF-RACK Receivers Page Operation Instructions Receiver and Amplifier Volume Adjustment Page Selecting a Frequency Channel on the Receiver Handheld Wireless Microphone Transmitter Unit Features and FunctionsPage Battery Installation Operation of the Hand Held TransmitterBelt Pack Transmitter Page Operation of the Belt Pack Transmitter Page AF 4-PIN Input Connection Methods Receiver UHF PCX-U302 SpecificationsOverall UHF PCX-U302 Transmitter UHF PCX-U302Troubleshooting Guide Page Page Peavey Electronics Corporation Limited Warranty Important Safety Instructions Features and specifications subject to change without notice

PCX-U302 specifications

The Peavey PCX-U302 is a versatile and powerful professional audio mixer designed for musicians, sound engineers, and audio professionals seeking high-performance solutions. Known for its robust build quality and advanced features, the PCX-U302 is suitable for various applications, including live performances, recording sessions, and presentations.

One of the standout features of the PCX-U302 is its impressive channel count. The mixer typically offers multiple input channels, allowing users to connect various audio sources, including microphones, instruments, and playback devices. Each channel is equipped with individual gain controls, equalization settings, and auxiliary send options, providing users with the flexibility to shape their sound precisely as needed.

The PCX-U302 incorporates state-of-the-art preamps that ensure high-quality audio reproduction. These preamps are designed to deliver low noise and high headroom, making them ideal for capturing subtle details in sound. Additionally, the mixer features high-pass filters on each channel, which helps eliminate unwanted low frequencies, enhancing overall clarity.

One of the key technologies integrated into the PCX-U302 is Peavey’s patented nanostructured composites. This innovative construction material enhances the durability and longevity of the mixer, making it suitable for both indoor and outdoor environments. The user interface is designed for ease of use, featuring clearly labeled controls and an intuitive layout that allows sound engineers to make quick adjustments during live performances.

Moreover, the PCX-U302 supports USB connectivity, enabling users to easily interface with computers and digital audio workstations. This feature is especially beneficial for recording audio directly into a DAW, offering high-fidelity sound capture. The mixer also typically supports various signal processing options, including built-in effects such as reverb and delay, providing additional creative possibilities.

The flexible routing options available on the PCX-U302 allow users to customize their audio setup. With configurable outputs and multiple monitoring options, users can tailor their experience based on the specific requirements of their performance or recording scenario.

In summary, the Peavey PCX-U302 is an excellent choice for audio professionals who demand quality, versatility, and reliability in their mixing equipment. With its array of features, advanced technology, and robust design, this mixer stands out as a powerful tool for achieving exceptional sound performance. Whether in a studio or on stage, the PCX-U302 delivers results that meet the high standards of today’s audio applications.
Top Page Image Contents