Peavey PCX-U302 specification

d.If the receiver output level is adjusted to a level that is near the maximum input level of the desired device, it will cause saturation distortion of the device when the receiver output level is increased due to a increase in level by the sound source. Conversely, S/N ratio will decrease if the receiver volume control is adjusted too low.

5.Plug the cable of the mains unit into DC socket on the receiver’s back panel. Thread the cable through the cable grip as shown in the figure below (Figure 10). The cable grip prevents the connector from being pulled off by accident.

Fig. 10

5.Caution

1.Since the installation of the antenna influences the operating efficiency of the receiver, the most important rule is to minimize the distance as much as possible between the receiving antenna and the microphone for the best reception and performance.

2.The output voltage of the external DC power supply should not be below 12V, otherwise it will not work properly. If the voltage is over 15V some components of the receiver will be damaged due to excessive current draw. Use a power supply with a 1A minimum rating.

PCX-U302 specifications

The Peavey PCX-U302 is a versatile and powerful professional audio mixer designed for musicians, sound engineers, and audio professionals seeking high-performance solutions. Known for its robust build quality and advanced features, the PCX-U302 is suitable for various applications, including live performances, recording sessions, and presentations.

One of the standout features of the PCX-U302 is its impressive channel count. The mixer typically offers multiple input channels, allowing users to connect various audio sources, including microphones, instruments, and playback devices. Each channel is equipped with individual gain controls, equalization settings, and auxiliary send options, providing users with the flexibility to shape their sound precisely as needed.

The PCX-U302 incorporates state-of-the-art preamps that ensure high-quality audio reproduction. These preamps are designed to deliver low noise and high headroom, making them ideal for capturing subtle details in sound. Additionally, the mixer features high-pass filters on each channel, which helps eliminate unwanted low frequencies, enhancing overall clarity.

One of the key technologies integrated into the PCX-U302 is Peavey’s patented nanostructured composites. This innovative construction material enhances the durability and longevity of the mixer, making it suitable for both indoor and outdoor environments. The user interface is designed for ease of use, featuring clearly labeled controls and an intuitive layout that allows sound engineers to make quick adjustments during live performances.

Moreover, the PCX-U302 supports USB connectivity, enabling users to easily interface with computers and digital audio workstations. This feature is especially beneficial for recording audio directly into a DAW, offering high-fidelity sound capture. The mixer also typically supports various signal processing options, including built-in effects such as reverb and delay, providing additional creative possibilities.

The flexible routing options available on the PCX-U302 allow users to customize their audio setup. With configurable outputs and multiple monitoring options, users can tailor their experience based on the specific requirements of their performance or recording scenario.

In summary, the Peavey PCX-U302 is an excellent choice for audio professionals who demand quality, versatility, and reliability in their mixing equipment. With its array of features, advanced technology, and robust design, this mixer stands out as a powerful tool for achieving exceptional sound performance. Whether in a studio or on stage, the PCX-U302 delivers results that meet the high standards of today’s audio applications.