Peavey PCX-U302 manual Battery Installation, Operation of the Hand Held Transmitter

Page 16

2.BATTERY INSTALLATION

1.

2.

Fig.12

Unscrew the grill/ball screen assembly at the collar to expose the battery compartment.

Insert the 9-volt battery taking care to observe the correct polarity. If the polarity is correct, the battery status indicator lamp will flash briefly. If no flash is observed, then it is likely the polarity is incorrect or the battery is dead flat and needs to be replaced.

3.Replace the grill/ball screen assembly, taking care to line up the 3 pins and polarizing lug with the 3 contractor plates. Screw the grill/ball screen back in to place, taking care not to force the turns. The turns should be smooth and easy. If the grill/ball screen assembly appears to either not engage, or tries to cross thread, remove it and check for the correct alignment of the pins.

2.OPERATION OF THE HAND HELD TRANSMITTER

When the microphone is switched on, the led indicator will flash briefly to indicate that the battery is OK and that the transmitter is powered up. At the receiver, the RF indicator will illuminate almost immediately to indicate that a RF link has been established and the AF indicator will illuminate

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents PLL True Diversityi Page Unit Features and Functions IntroductionTrue Diversity Receiver Front PanelAntenna Input Connector a Power Switch and Indicator Group IndicatorChannel Indicator RF Signal Level IndicatorAntenna Input Connector B Rear Panel Unbalanced Level SwitchSquelch Adjustment Installation of the ReceiverAudio Output Connection Unbalanced OutputBalanced Output Setup for Dual HALF-RACK Receivers Page Operation Instructions Receiver and Amplifier Volume Adjustment Page Selecting a Frequency Channel on the Receiver Handheld Wireless Microphone Transmitter Unit Features and FunctionsPage Battery Installation Operation of the Hand Held TransmitterBelt Pack Transmitter Page Operation of the Belt Pack Transmitter Page AF 4-PIN Input Connection Methods Specifications Overall UHF PCX-U302Receiver UHF PCX-U302 Transmitter UHF PCX-U302Troubleshooting Guide Page Page Peavey Electronics Corporation Limited Warranty Important Safety Instructions Features and specifications subject to change without notice

PCX-U302 specifications

The Peavey PCX-U302 is a versatile and powerful professional audio mixer designed for musicians, sound engineers, and audio professionals seeking high-performance solutions. Known for its robust build quality and advanced features, the PCX-U302 is suitable for various applications, including live performances, recording sessions, and presentations.

One of the standout features of the PCX-U302 is its impressive channel count. The mixer typically offers multiple input channels, allowing users to connect various audio sources, including microphones, instruments, and playback devices. Each channel is equipped with individual gain controls, equalization settings, and auxiliary send options, providing users with the flexibility to shape their sound precisely as needed.

The PCX-U302 incorporates state-of-the-art preamps that ensure high-quality audio reproduction. These preamps are designed to deliver low noise and high headroom, making them ideal for capturing subtle details in sound. Additionally, the mixer features high-pass filters on each channel, which helps eliminate unwanted low frequencies, enhancing overall clarity.

One of the key technologies integrated into the PCX-U302 is Peavey’s patented nanostructured composites. This innovative construction material enhances the durability and longevity of the mixer, making it suitable for both indoor and outdoor environments. The user interface is designed for ease of use, featuring clearly labeled controls and an intuitive layout that allows sound engineers to make quick adjustments during live performances.

Moreover, the PCX-U302 supports USB connectivity, enabling users to easily interface with computers and digital audio workstations. This feature is especially beneficial for recording audio directly into a DAW, offering high-fidelity sound capture. The mixer also typically supports various signal processing options, including built-in effects such as reverb and delay, providing additional creative possibilities.

The flexible routing options available on the PCX-U302 allow users to customize their audio setup. With configurable outputs and multiple monitoring options, users can tailor their experience based on the specific requirements of their performance or recording scenario.

In summary, the Peavey PCX-U302 is an excellent choice for audio professionals who demand quality, versatility, and reliability in their mixing equipment. With its array of features, advanced technology, and robust design, this mixer stands out as a powerful tool for achieving exceptional sound performance. Whether in a studio or on stage, the PCX-U302 delivers results that meet the high standards of today’s audio applications.
Top Page Image Contents