Individual EFFECTS/PARAMETERS, Distortion/Exciter

Changing Parameters:

Use the ▲ FX EDIT button to select which parameter you wish to edit. The main display will show the current value that the particular parameter is set to. To adjust the parameter, use the parameter ▲ or ▼ buttons. First, select the pitch shift semi-tone parameter by pressing the ▲ FX EDIT button. Set the parameter using the parameter up or down buttons.

Use the ▲ FX EDIT button to select the cents parameter and use the parameter up or down button to set it. Note that if the parameter ▲ or ▼ button is held down, it will scroll to the desired value.

Now use the ▲ FX EDIT button to select the mix parameter and use the parameter ▲ or ▼ buttons to set it.


To select the delay effect, use the		▲		FX EDIT button and use the parameter ▲ or ▼ to turn it off. Once the
effect is turned off, it isn’t necessary to zero out the parameters.
To select the EQ effect Use the	▲		FX EDIT button. It is currently set to Ld (lead), but in this instance, change

it to CL (clean). Press the parameter ▼ button one time to get to the CL position.

Storing Edited Presets:

After making all the changes to the preset, store it by pressing the Store button. Note that the display will blink between S.t and 4.A, indicating that the destination preset location is 4.A. To select a different destination preset location, simply use the parameter ▲ or ▼ buttons. Once the appropriate destination preset number is in the display, press Store again to store the preset there. At any point during the store process, press the Play button to abort the store operation.

Selecting the Analog Compressor:

Each Vocal 100 user preset may utilize the built-in Analog Compressor. This is indicated by the Enabled LED inside the compression block on the faceplate. To change the selected compressor status for a preset, simply press the COMP. button and follow the same storing procedure as listed above to store the change.

INDIVIDUAL EFFECTS/PARAMETERS

Distortion/Exciter

The Distortion effect is a clipped, overdriven version of the dry signal. The Exciter adds subtle harmonics to the dry signal for extra sizzle.

Parameters

•Off/Drive: The Off/Drive parameter determines whether the effect is activated and controls the amount of

drive. There are 10 exciter settings (E0 - E9) and 10 distortion settings (D0 - D9). Note: When adjusting the distortion settings, increase slowly to avoid feedback.

•Voicing: This parameter selects different EQ voicings. Listen to each to see which best fits your needs.

•Volume: The Volume parameter controls the signal level after the distortion. With exciter, it controls the amount of added harmonics without changing the raw signal.

•Noise Gate Threshold: The Noise Gate Threshold sets the minimum signal level allowed to pass through the noise gate. Higher values yield less allowable low level signals (a higher noise floor). Lower values allow more low level signals to pass (a lower noise floor), thus allowing unblocked noise to go through the

noise gate.

100 specifications

The Peavey 100 is a versatile and reliable guitar amplifier that has garnered significant attention among musicians for its distinctive sound and robust feature set. Designed primarily for electric guitar players, the Peavey 100 is known for its ability to deliver a range of tonal possibilities, making it suitable for various musical styles, from rock and blues to country and jazz.

One of the standout features of the Peavey 100 is its power output. With 100 watts of power, this amplifier is capable of producing a rich and loud sound without compromising clarity. It is equipped with a 12-inch speaker, which contributes to its full-bodied sound. The amp's design provides ample headroom, making it ideal for both practice and live performances.

Another notable characteristic of the Peavey 100 is its built-in effects. Musicians can take advantage of various effects, including reverb, delay, and chorus, allowing players to add depth and texture to their sound. The user-friendly interface of the amp permits easy adjustments of these effects, catering to both seasoned professionals and novice players.

Technologically, the Peavey 100 incorporates advanced circuitry that enhances its performance. The amp features tube emulation technology, which aims to replicate the warm, rich tones associated with traditional tube amplifiers. This feature provides a unique sonic profile, ensuring that players experience the distinct characteristics of tube-driven sound without the maintenance concerns associated with actual tubes.

The amplifier also comes with multiple channels, typically including clean and overdrive modes. Each channel has distinct tonal characteristics, allowing customization to suit personal preferences or specific musical genres. This channel-switching capability provides real-time versatility, making it easy for musicians to transition seamlessly between different playing styles during performances.

In terms of portability, the Peavey 100 is designed to be lightweight yet sturdy, making it an excellent choice for gigging musicians who require an easily transportable option without sacrificing sound quality. Its durable construction is complemented by a sleek design, ensuring it stands out both visually and acoustically.

Overall, the Peavey 100 is a dynamic amplifier that strikes an impressive balance between power, versatility, and portability. With its range of features and technological advancements, it remains a favorite among guitarists seeking a reliable and high-performing amplifier for their musical endeavors.