Pitch Shift, Chorus, Flanger | Peavey 100 specification

Pitch Shift

The Pitch Shift effect raises or lowers the pitch of the incoming signal by a predetermined amount.

Parameters

•Off/On: The Off/On parameter activates or deactivates the Pitch Shift effect.

•Semi-Tones: This parameter can be adjusted in half-steps from (-12) to (+12) offering up to an octave flat and an octave sharp.

•Cents: Is a fine-tuning tool that divides the half-steps into smaller increments so that more accurate settings can be made.

•Mix: The Mix parameter allows mixing between wet and dry. For a maximum wet level and minimum dry level, adjust this parameter to 99. A setting of 0 will result in only dry signal passing through.

Chorus

The stereo Chorus effect mixes a delayed signal to the dry, while modulating the delay time, which period- ically changes the interval of pitch shift. This yields a pleasing stereo effect that sounds like several voices at once with slight variations in pitch.

Parameters

•On/Off: The On/Off parameter determines whether the effect is activated.

•Chorus/Flanger/Phaser: The Chorus/Flanger/Phaser parameter determines which effect is selected, the Chorus (Ch), Flanger (FL) or Phaser (Ph).

•Rate: The Rate parameter adjusts the speed that the delay is modulated—rate can be varied from 0-99 (0-9.9 Hz in 0.1 Hz steps).

•Depth: The Depth control adjusts the amount of variation of delay time that is applied to the delay. The 0-99 range should be used with taste, and is generally decreased when increasing the Rate control.

Flanger

The Flanger originated from the recording technique called “flanging” in which the recording engineer would rest his hand on the flange of the tape reel. By varying the pressure applied, the tape speed was varied, and the pitch modulated. Electronic versions from the 70s also included feedback systems to increase the intensity of the effect and thus created the classic Flanger effect.

Parameters

•On/Off: The On/Off parameter determines whether the effect is activated.

•Chorus/Flanger/Phaser: The Chorus/Flanger/Phaser parameter determines which effect is selected, the Chorus (Ch), Flanger (FL) or Phaser (Ph).

•Rate: As in the Chorus effect, the Rate parameter adjusts the speed that the delay is modulated. It can be varied from 0-99 (0-9.9Hz in 0.1 Hz steps).

100 specifications

The Peavey 100 is a versatile and reliable guitar amplifier that has garnered significant attention among musicians for its distinctive sound and robust feature set. Designed primarily for electric guitar players, the Peavey 100 is known for its ability to deliver a range of tonal possibilities, making it suitable for various musical styles, from rock and blues to country and jazz.

One of the standout features of the Peavey 100 is its power output. With 100 watts of power, this amplifier is capable of producing a rich and loud sound without compromising clarity. It is equipped with a 12-inch speaker, which contributes to its full-bodied sound. The amp's design provides ample headroom, making it ideal for both practice and live performances.

Another notable characteristic of the Peavey 100 is its built-in effects. Musicians can take advantage of various effects, including reverb, delay, and chorus, allowing players to add depth and texture to their sound. The user-friendly interface of the amp permits easy adjustments of these effects, catering to both seasoned professionals and novice players.

Technologically, the Peavey 100 incorporates advanced circuitry that enhances its performance. The amp features tube emulation technology, which aims to replicate the warm, rich tones associated with traditional tube amplifiers. This feature provides a unique sonic profile, ensuring that players experience the distinct characteristics of tube-driven sound without the maintenance concerns associated with actual tubes.

The amplifier also comes with multiple channels, typically including clean and overdrive modes. Each channel has distinct tonal characteristics, allowing customization to suit personal preferences or specific musical genres. This channel-switching capability provides real-time versatility, making it easy for musicians to transition seamlessly between different playing styles during performances.

In terms of portability, the Peavey 100 is designed to be lightweight yet sturdy, making it an excellent choice for gigging musicians who require an easily transportable option without sacrificing sound quality. Its durable construction is complemented by a sleek design, ensuring it stands out both visually and acoustically.

Overall, the Peavey 100 is a dynamic amplifier that strikes an impressive balance between power, versatility, and portability. With its range of features and technological advancements, it remains a favorite among guitarists seeking a reliable and high-performing amplifier for their musical endeavors.