Philips 32PF9631D/10 Connect a PC, PC equipped with a VGA connector, With Analogue audio

Connect a PC EN

Notes:

- only a PC with digital sound can be connected to the HDMI connection;

- if your PC does not have digital sound output, connect your PC via a VGA connector;

-before connecting your PC to the TV, select your PC monitor settings to a refresh frequency of 60 Hz;

-supported PC monitor modes:

VGA	640 x 480
SVGA	800 x 600
XGA	1024 x 768

AUDIO OUT DISPLAY SYNCHRONIZED

DIGITAL

R AUDIO LAUDIO

OUTOUT

	AUDIO			DIGITAL
R			L	AUDIO
	IN
				IN
Y		Pb		Pr
		HDTV & Progressive
EXT3		480p, 576p, 720p, 1080i

	AUDIO in R/L	VGA
2	o	o

AUDIO IN L/R PC-VGA

VGA

1

PC equipped with a VGA connector:

1.Connect one end of a VGA cable 1 to the video card of the computer and the other end to the VGA connector at the bottom of the TV. Fix the connector firmly with the screws on the plug.

2.In case of a Multimedia computer, connect the audio cable 2 to the AUDIO outputs of your computer and to the L/R AUDIO input of the TV.

3.Select VGA in the Installation menu, Select your connections, p. 29 and link it to VGA.

4.Also select Analogue audio In in the same Connections menu.

			AUDIO OUT		DISPLAY SYNCHRONIZED
				AUDIO		DIGITAL
			R		L	AUDIO
				OUT		OUT
				AUDIO		DIGITAL
			R		L	AUDIO
				IN
						IN
			Y		Pb	Pr
						2
		EXT3	EXT3		HDTV & Progressive
					480p, 576p, 720p, 1080i
HDMI		AUDIO in L/R				DIGITAL
						AUDIO
o	o	o	o			IN
HDMI 1	HDMI 2	AUDIO IN L/R	PC-VGA

HDMI

3

DVI

1

PC equipped with a DVI connector: With Digital audio

1.Use a DVI to HDMI cable to connect to one of the HDMI connector of your TV 1.

2.Connect the audio cable 2 to the DIGITAL AUDIO IN connector of the TV.

3.Select the computer you have connected in the Installation menu, Select your connections,

p. 29 and link it to HDMI 1 or 2.

4.Also select Digital audio In in the same Connections menu.

With Analogue audio

1.Use a DVI to HDMI cable to connect to the HDMI 2 connector of your TV 1.

2.Connect the audio cable 3 to the L/R AUDIO input of the TV.

3.Select the computer you have connected in the Installation menu, Select your connections,

p. 29 and link it to HDMI 2.

4.Also select Analogue audio In in the same Connections menu.

47

Downloaded From TV-Manual.com Manuals