EN |
| Annex 2 (Continued) |
|
|
|
|
| Manual software upgrade procedure | |
|
| For a manual software upgrade copy the “autorun.upg” file | |
|
| in a directory called “Upgrades” located in the root of the | |
TV menu |
| USB portable memory.You can rename the file if you like | |
Installation | Software upgrade | but keep the .upg extension. | |
| |||
............. | Current softw. info | 1. Insert the portable memory that contains the downloaded | |
Time zone | Local upgrades | ||
software upgrade. | |||
Channels | Announcement | ||
2. Select Software Upgrade in the Installation menu. Go to | |||
Preferences |
| Local upgrades. | |
Connections |
| The TV will list all compatible software available on the USB | |
Decoder |
| portable memory and display the data for each selected | |
| upgrade version. | ||
Factory settings |
| ||
| 3. Select the correct upgrade version and press the red colour | ||
Software upgrade |
| ||
| key to start the upgrade. | ||
|
| ||
Info |
| Your TV will restart and will automatically go to the upgrade | |
| mode. After a few seconds it will display the status of the | ||
|
| ||
|
| upgrade procedure. | |
|
| Warning: if you try to upgrade to a software version | |
|
| equal or lower than the current version, a confirmation | |
|
| will be asked. Downgrading to older software should only | |
|
| be done in case of real necessity. |
4.When the software upgrade was successful, remove the USB portable memory and restart your TV with the power switch B at the side of the TV.Your TV will start up with the new software.
56
Downloaded From