Philips 32PF9631D/10 Introduction Digital TV, Switch the TV on, First time installation

Page 8

EN

8

Introduction: Digital TV

Next to analogue broadcast reception, your TV has a built-in TV tuner which receives, decodes and displays digital terrestrial signals.

Digital TV and radio channels are only available and reproduced:

-when Digital Video Broadcasting Terrestrial (DVB-T) is applicable in your local area;

-and if DVB-T signal is supported by your TV for the country you live in. See www.philips.com/support for the list of supported countries.

Switch the TV on

<Press the power switch B at the side of the TV.

>An indicator on the front of the TV lights up and the screen comes on.

<If the TV is in standby mode, press the -P+keys or the B key on the remote control.

Note: the first time (and only the first time) you switch on your TV, you see a Welcome screen followed by the installation procedure. See First time installation, p. 9.

First time installation

The first time (and only the first time) you switch on your TV, you see a Welcome screen followed by the installation procedure.

The installation procedure consists of a series of screens that will guide you through the installation of your TV.

Follow the instructions on screen.

Note: if the TV has already been installed before and/or you want to change the First time installation settings, proceed with Use of the TV menu settings, p. 13.

Downloaded From TV-Manual.com Manuals

Image 8

Contents Contents Safety warnings GeneralCare of the screen Stationary images on the TV screenBefore you start Overview of the rear connector panelGetting started Connect the mains Remote controlConnect the antenna Use of the remote control RC4404/01 +P- Channel selection Digit keysAV Select your peripherals Previous channelUse of the Option key Keys at the left side of the TVSwitch the TV on First time installationIntroduction Digital TV Follow the instructions on screenComplete the initial TV installation procedure Select your on-screen languageSettings assistant select your TV settings How to navigate through the menus IntroductionInstallation allows you Use of the TV menu settingsAdjust Picture and Sound settings Use of the Standard settings if present Individual settings for Picture and SoundAdjust picture menu settings Pixel Plus Digital Natural MotionClearLCD Dynamic contrastMpeg artefact reduction Mpeg artefact reduction On smoothensColour enhancement Select Off , Minimum , Medium or MaximumAdjust sound menu settings VolumeAllows you to adjust the sound output level BalanceSurround mode Headphone volumeAVL Automatic Volume Leveler Delta volumeAdjust feature menu settings SubtitleSleeptimer Select SleeptimerChildlock Important you have forgotten your codeSelect Set or Change code On timerSet code/Change code Common interface DemoHow to search for and store TV channels Installation menuSelect your language preferences Menu languageSelect your country Store TV and radio channelsThis will not reinstall uninstalled channels Already installed channels will not be renumberedIs in standby mode Not alteredAnalogue manual installation Rename Rearrange the channel number listReshuffle Set your preferences Select your locationSelect Teletext Select the On Screen Display OSDSelect your connections Select a Decoder channel numberDigital Audio Select ConnectionsReset the Factory settings How to upgrade the TV softwareCreate your favourite list To select a channel from the displayed favourite listTo select another favourite channel list To create a favourite list or to modify the listCreate your favourite channels list TipsEPG Electronic Programme Guide To view content from a USB device Multimedia BrowserTo insert a USB device To remove the USB deviceMultimedia Browser menu Following icons may appearMultimedia function keys on the remote control Function keys at the bottom of the screenTeletext Hypertext Enlarge a TeletextTeletext menu RevealDigital text only for UK Text infoTo make video and audio connections Headphone To make video and audio connections Side panel overviewCamera, Camcorder, Game To make video and audio connections Rear panel overview CableConnect a VCR or DVD recorder With a eurocableWith the aerial cable only Connect a decoder and a VCRWith Component Video connectors Connect two VCRs or VCR and DVD recorderConnect a satellite receiver With eurocablesWith a Hdmi connector With a DVI connectorConnect a DVD player, Cable box or game console Connect a DVD player or Cable boxConnect a DVD player, a satellite receiver or Cable box PC equipped with a VGA connector PC equipped with a DVI connector With Digital audioConnect a PC With Analogue audioAnalogue Home Cinema amplifier Connect a Home Cinema amplifierDigital Home Cinema amplifier Use the Common Interface slot Insert a CA moduleSelect Installation Select connected equipmentRecord with your recorder Record a TV programmeTo select between Normal and Expert mode Audio- and video equipment keysTroubleshooting To cancel the selected mode Annex 2 Philips TV software upgrade with portable memory To prepare a portable memory for software upgradeIntroduction To verify the version of the TV softwareAutomatic software upgrade procedure AnnexManual software upgrade procedure Annex 3 Philips TV-Slideshow Format with background music General RulesGeneral Format Following syntax should be used to create the text fileSupported XML-tags Tag Name Use DescriptionAnnex 4 Philips TV Digital camera and USB issues Digital Camera IssuesUSB Memory Device Issues Digital Content IssuesPC VGA Index 11,32Recycling Product informationRecycling Disposal of batteries Disposal of your old productContents