Fostex FD-8 owner manual Auto Return, Executing the Auto Play function

Locate Function

Executing the Auto Play function

2

3

1

1.Press the AUTO RTN/AUTO PLAY key to turn on the [PLAY] indicator on the bottom of the display.

AUTO

PLAY

2.Press the desired memory key.

3.Press the LOCATE key.

The FD-8 locates the point and plays as shown in the diagram.

•You can set a preroll time in the [Preroll ?] menu in SETUP mode so that the FD-8 will start playback preroll time before the locate point.

You can set the preroll time from 0 to 10 seconds. Refer to the chapter “Changing the Initial Settings (SETUP Mode)” on page 102.

Auto Return

This function allows the FD-8 to play data up to the AUTO RTN END point, then automatically locate the AUTO RTN START point as shown in the diagram below.

To enable this function, AUTO RTN mode should be on and the AUTO RTN START point and AUTO RTN END point should already be set.

<Operation of the Auto Return mode.>

AUTO RTN START point AUTO RTN END point

PLAYBACK	PLAYBACK
START	Automatic locating to the AUTO RTN START point
	subsequent to playback to the AUTO RTN END point.
	LOCATE
	STOP

71