DOD GS30 manual

Page 11

. Connect your instrument to the GS30 input jack.

a.(mono) Connect the left output to the input of your amplifier, or line input of a mixing console.

b. (stereo) Connect the left and right outputs to the inputs of two amplifiers, or two line inputs of a mixing onsole.

. Set the tone controls of the amplifier(s) or mixing console to the flat or 0 position. If you are running stereo into a mixer set the pan controls hard left and hard right. Turn your amplifier or mixer’s volume level down.

. Apply power to the GS30 by connecting the PS750 from the power jack to an AC outlet.

. Turn the power switch of your amplifier or mixer to the “on” position.

. Begin playing and gradually increase the amplifier or mixer’s volume until the desired level is achieved.

7

Image 11

Contents Page Electromagnetic Compatibility Declaration of Conformity Table of Contents Ntroduction Congratulations Ncluded Items Guided Tour of the GS30 Front Panel Section ONE IntroductionPage Page Rear Panel Making Connections Getting StartedPage Section TWO About the GS30 Performance ModeSelecting a Preset Footswitches Accessing the Tuner Learn-A-Lick/Jam-A-Long Our record time is used User Interface Section Three Edit ModeEditing a Preset Page Page Expression Pedal Assignments Wah Modulation Depth Delay Level Amp Gain Modulation LevelPage Storing/Copying a Preset Musical history Section Four Effects DefinitionsPage Page Page Parameter Definitions Section Five Tutorial Creating a PresetPage Page Ongratulations! You have successfully created a new Preset Calibrating the Expression Pedal Resetting the GS30Section SIX Other Stuff Maintenance and Service Section Seven Appendix WarrantyEadphone Output Impedance 10 ohms Specifications