DOD GS30 manual Section Five Tutorial, Creating a Preset

Page 28

SECTION FIVE - Tutorial

Creating a Preset

uppose you want to create a Preset that has medium Compression, the Amp Modeling of a Stack with high Gain nd boosted highs and lows on the EQ, a low Threshold setting on the Noise Gate, a slow medium Chorus, no elay, and a Room Reverb. Let’s also suppose that you wanted the Expression Pedal to control a classic Wah. The eps outlined below will guide you through creating this Preset.

tep 1. Adjust the Compression - Press the effect select button under the Compression group. The LED next o Compressor will begin to flash. The Display will show the current status of the Compressor. Since we want a medium compression setting, rotate the Data Wheel until the number 2 shows in the Display.

tep 2. Select the Wah Type - Since the Wah effect is in the Compression section, press the select button nder the Compression group again. The LED next to Wah will begin to flash. Rotate the Data Wheel until the isplay shows the number 1 (representing a classic wah).

Image 28
Contents Page Electromagnetic Compatibility Declaration of Conformity Table of Contents Ntroduction Congratulations Ncluded Items Section ONE Introduction Guided Tour of the GS30 Front PanelPage Page Rear Panel Getting Started Making ConnectionsPage Selecting a Preset Performance ModeSection TWO About the GS30 Footswitches Accessing the Tuner Learn-A-Lick/Jam-A-Long Our record time is used Editing a Preset Section Three Edit ModeUser Interface Page Page Wah Modulation Depth Delay Level Amp Gain Modulation Level Expression Pedal AssignmentsPage Storing/Copying a Preset Section Four Effects Definitions Musical historyPage Page Page Parameter Definitions Creating a Preset Section Five TutorialPage Page Ongratulations! You have successfully created a new Preset Section SIX Other Stuff Resetting the GS30Calibrating the Expression Pedal Maintenance and Service Warranty Section Seven AppendixSpecifications Eadphone Output Impedance 10 ohms