Fender 25 manual Type Part Numbers

Page 5

O. IEC LINE CORD CONNECTOR - The power line cord must be connected to a grounded AC receptacle in accordance with the voltage and frequency ratings as shown on the Rear Panel of the unit INPUT POWER {P}.

Q. EXTERNAL SPEAKER - Connect an external speaker (8Ω) at this jack. The internal speaker is automatically disconnected. NOTE: Switch unit OFF before making speaker connections.

R. TUNER OUT - Connect your bass guitar-tuner here. This output jack is NOT disabled by Front Panel MUTE switch, allowing quiet tuning with the bass guitar plugged into the unit.

S. LINE OUT - Connect recording or sound reinforcement equipment at this

output jack.

T. EFFECTS SEND - Connect cable to external effects devices at this output jack.

U. EFFECTS RETURN - Connect cable from external effects devices at this input jack.

NOTE: Link two Bassman 25’s together using

the EFFECTS jacks. Connect the EFFECTS SEND {T} from the “master unit” to the EFFECTS RETURN {U} of the “clone unit.”

TYPE

 

PR 422

 

PART NUMBERS

 

022-4501-000 (120V),

022-4531-000 (240V) Aust,

 

 

022-4541-000 (230V) UK,

022-4561-000 (230V) Eur,

 

 

022-4571-000 (100V)

 

POWER REQUIREMENTS

100V AC, 50/60Hz: 75W,

120V AC, 60Hz: 75W,

 

 

230V AC, 50Hz: 75W,

240V AC, 50Hz: 75W

POWER AMPLIFIER

OUTPUT:

25W RMS into 8 Ω @ <5%THD

 

SENSITIVITY:

2V RMS

 

PRE AMPLIFIER

INPUT IMPEDANCE:

INPUT 1: 34k Ω,

INPUT 2: 68k Ω

SENSITIVITY FOR FULL POWER:

INPUT 1: 250mV,

INPUT 2: 500mV

 

NOMINALLEVEL:

INPUT 1: 50mV,

INPUT 2: 100mV

TONE CONTROLS

 

BASS: +/-15dB @ 80Hz

 

 

 

MID LEVEL: +/-15dB @ 1.5kHz

 

 

TREBLE: +/-15dB @ 8kHz

 

EFFECTS LOOP

SEND IMPEDANCE:

1k Ω

 

 

RETURN IMPEDANCE:

44k Ω

 

 

NOMINALLEVEL:

0dBu

 

SPEAKER

 

Fender Special Design 8 Ω, 10,” (Part#0038657000)

DIMENSIONS

HEIGHT:

16.5 in.

(41.9 cm)

 

WIDTH:

15 in.

(38.1 cm)

 

DEPTH:

15 in.

(38.1 cm)

WEIGHT

 

33 lb.

(15 kg)

Product specifications are subject to change without notice.

5

Image 5
Contents Page English Pages Page Page Type Part Numbers Page Tipo Números DE Pieza Page Sortie Inter ruttor e di alimentazione Power Uscita Page TYP Artikelnummer Page Page 055663 REV a
Related manuals
Manual 20 pages 5.12 Kb

25 specifications

Fender 25 represents a significant evolution in electric guitars, combining classic Fender design principles with modern innovation. Renowned for its exceptional playability and distinctive sound, the Fender 25 has gained a dedicated following among both novice players and seasoned musicians.

One of the most notable features of the Fender 25 is its body shape. The guitar offers a balanced silhouette, crafted from premium tonewoods that contribute to incredible resonance and sustain. The body is typically constructed from either alder or ash, which not only enhances the tonal quality but also ensures durability and lightweight handling.

The neck of the Fender 25 is designed for optimal playability. A smooth, easy-to-navigate maple or rosewood fingerboard sits atop a comfortable neck profile, allowing guitarists to effortlessly navigate scales and chords. The fretwork is meticulously executed, guaranteeing a smooth playing experience across the entire range of the instrument. The Fender 25 often features 21 or 22 frets, accommodating both rhythm and lead players.

Equipped with Fender’s proprietary pickups, the Fender 25 delivers a versatile tonal palette. These pickups are designed to capture the essence of classic Fender sounds while integrating modern enhancements. The combination of single-coil and humbucking configurations allows players to switch between bright, clear tones and deeper, warmer sounds with ease. The guitar’s electronics include a straightforward control layout, featuring volume and tone knobs that provide fine-tuning of the output.

Another characteristic that stands out is the finish options available. The Fender 25 is offered in a variety of vibrant colors and subtle sunbursts, showcasing the natural beauty of the wood grains. This aesthetic appeal, combined with high-quality hardware including reliable tuning machines and a sturdy bridge system, makes it an attractive choice for players who appreciate both form and function.

In terms of technologies, Fender’s commitment to innovation is evident in the Fender 25's construction methods. Modern manufacturing techniques ensure consistency and reliability in sound quality, while CNC machining allows for precise neck pocket fittings and body contours.

In summary, the Fender 25 is an exceptional blend of traditional craftsmanship and contemporary technology. Whether on stage or in the studio, this guitar meets the demands of modern musicians while remaining true to the iconic Fender legacy. Its balance of playability, tonal versatility, and striking aesthetics makes it a standout choice for guitar enthusiasts around the globe.