Fender 25 manual

Your new	amplifier has its
roots in Fender’s	family of pro-

fessional bass amps. Extra features spe-

cial to the were designed for

teachers and students of music alike. Most apparent is the tilt-back design of the cabinet. Angled like a stage monitor, the tilt-back position makes listen-

ing direct and clear.

Dual INPUT jacks permit two bassists to plug

into the compactwhile the LINE OUT jack makes it easy to record your ses- sions. Plug a CD or tape player into the AUX- ILIARY INPUT RCA jacks and play along with a recording through your amplifier.

Other professional-quality features of the include the MUTE switch which cuts all outputs except the TUNER

output, making tune-ups quick and quiet. For privacy, the headphone jack automati- cally cuts speaker output. The ENHANCE switch modifies the mid-frequency contour of your signal for a fatter sound while the three-band EQUALIZER offers fine tuning. Bass guitars with active pre-amps are accommodated with INPUT 2. Plug in exter- nal effects devices to the EFFECTS jacks on

the Rear Panel of thefor unlim- ited sonic options.

A.INPUT 1 - Input jack for bass guitars.

B.INPUT 2 - Input jack for bass guitars with active pre-amps (attenuated -6dB).

C.MUTE - Switch IN, disables all outputs (includ- ing speakers) except TUNER output on the Rear Panel. Switch OUT, for normal unit oper- ation.

D.MUTE LED - Illuminates when MUTE {C} switch is IN.

E.VOLUME - Adjusts the loudness of the internal speaker (or external speaker, if used).

F.ENHANCE - Switch IN, modifies the contour of the middle-frequency range (useful for slap- style and deep-toned bass playing). Switch OUT, for ENHANCE OFF (useful for finger-style bass playing).

G.BASS LEVEL - Adjusts the level (boost/cut) of the low-frequency range.

H. MID LEVEL - Adjusts the level (boost/cut) of the middle-frequency range.

I.TREBLE LEVEL - Adjusts the level (boost/cut) of the high-frequency range.

J.AUXILIAR Y INPUT - Connect an external tape/compact-disc player at these RCA stereo jacks. NOTE: Stereo input is mixed down to a mono signal

K.AUXILIARY LEVEL - Adjusts the AUXILIARY INPUT {J} signal level.

L.HEADPHONES - Connect headphones (stereo or mono) at this jack. Speaker outputs are automatically disabled for privacy.

M.POWER LED - Illuminates when the POWER SWITCH {N} is ON and the unit is receiving power. NOTE: MUTE {C} switch must be OUT for normal unit operation.

N.POWER SWITCH - Push upper-halfIN, to switch unit ON. Push lower-halfIN, to switch unit OFF.

4