Grizzly H8070 owner manual Introduction, Foreword, Contact Info

Page 5

SECTION 2: INTRODUCTION

Foreword

We are proud to offer the Model H8070 Heirloom Telecaster-Style Guitar Kit. This kit is a part of a growing Grizzly family of fine woodworking prod- ucts. When assembled according to the guidelines set forth in this manual, you can expect years of enjoyment from your guitar.

We are pleased to provide this manual for the Model H8070. It was written to guide you through assembly, review safety considerations, and cover general information. It represents our effort to pro- duce the best documentation possible.

Telecaster® is a registered trademark of Fender Musical Instruments Corp. This kit is not made or sponsored by Fender Musical Instruments Corp.

H8070 Heirloom Telecaster-Style Guitar Kit

Contact Info

If you have any comments regarding this manual, please write to us at the address below:

Grizzly Industrial, Inc.

C/O Technical Documentation Manager

P.O. Box 2069

Bellingham, WA 98227-2069

Email: manuals@grizzly.com

We stand behind our products. If you have any service questions or parts requests, please call or write us at the location listed below.

Grizzly Industrial, Inc.

1203 Lycoming Mall Circle

Muncy, PA 17756

Phone: (570) 546-9663

Fax: (800) 438-5901

E-Mail: techsupport@grizzly.com

Web Site: http://www.grizzly.com

-3-

Image 5

Contents Model H8070 Heirloom Telecaster Style Guitar KIT Page Table of Contents Safety Contact Info IntroductionForeword Inventory Parts InventoryRecommended Tools & Supplies Supplies/ToolsIdentification Shaping Headstock AssemblyComponents Needed Qty Tools NeededSanding Neck Sanding BodyComponents and Hardware Needed Qty RepeatFinishing Body Finishing NeckTo finish the guitar neck To finish the guitar bodyPage Another way to determine neck mounting hole depth Optional To determine neck mounting hole depthTo drill mounting holes in the neck To mount the neck to the bodyTo position the pick guard, control plate and bridge Positioning Pick Guard, Control Plate BridgeFlush mounted ferrules Installing FerrulesTo install the tuners To install the ferrulesMounting Tuners Go to Mounting TunersTo wire the pickups Wiring PickupsInstalling Bridge Pickups & Controls Installing Output JackTo install the output jack To install the control plate and pickupsTo install the nut Installing NutStrap Buttons To attach the strap buttons to the guitarWinding Strings To install strings through the bodyString Retainers To install the strings using only the bridgeTo install the string retainer Neck Adjustment SetupTo adjust the bow of the guitar neck GeneralTools Needed Qty To adjust the string heightString Height To tune the guitar Pickup Height TuningTo measure the string height at the pickup To set the intonation Setting IntonationReference Info AccessoriesH1300 H1298 G7984 H2347 H0736 H3097-Chromatic TunerG1530-Router Pad Model H5750-59 McFaddens Lacquers and FillersModel H8912 Sandpaper Electrical Components Control plate wiring Tone Output JackSwitch Wiring Diagram Warranty and Returns Page Page