Pick Guard
To attach the pick guard to the body:
1.Peel the white paper from the pick guard to reveal the adhesive backing.
2.Place the pick guard on the body so the
3.Peel the clear protective covering from the face of the pick guard.
Winding Strings
The correct position of the guitar strings is shown in Figure 13. The thin High E string is called the "1st" string and the thick Low E string is called the "6th" string.
6 E
5 A
4 D
3 G
2 B
1 E
Figure 13. Correct guitar string position.
To install the guitar strings:
1.Using a 3⁄16" drill bit, drill out the six string mounting holes in the bridge.
2.Insert the ball end of the string into the cor- responding bridge hole.
(Continued)
H3098 Western Guitar Kit |