8Storing & Copying Programs
To Store a Program
1.In PLAY or EDIT mode, press the VALUE knob. The display will flash the current program number.
2.Use the VALUE knob or the foot pedals to select the program number where the current program will be stored. If you want to save it in the same program number, you can skip this step.
3.Press the VALUE knob again to store the program in the selected place. The BassFX then returns to the mode it was in before you began the store operation, and the destination program becomes the current program.
1
3
2
To Copy a Program
A copy is just a store of a program that hasn’t been modified, so just follow the same steps as you would to store a program.
The store operation times out if you do nothing for more than five seconds. You also can abort the operation by turning the EFFECT knob to a different position.
22