23 |
This control sets the amount of signal sent to the control room and headphone.
4.4 CTRL ROOM OUTPUT Connectors | 24 |
These 1/4" sockets are used to send the control room signal to the studio monitor speakers or a second set of PA.
4.5 2TK IN/OUT Connectors | 25 |
-. TAPE IN
Use the tape input if you wish to listen to your mix from a taper recorder or DAT. You can assign the signal coming from the taper recorder either to a pair of studio monitor using the control room assignment on the front panel or you can also send the signal directly to the main mix.
-. TAPE OUT
These RCA jacks will route the main mix into a tape recorder.
CTRL ROOM OUTPUT
LR
24
2-TRACK IN/OUT
L
25
R
TAPE IN | TAPE OUT |
4.6 AUX SENDS Connector | 26 |
AUX SENDS
These 1/4" sockets are used to send out the signal from the AUX bus to external devices such effects.
PHONES
MAIN MIX OUTPUT
LEFTRIGHT
4.7 PHONES | 27 | 26 | 27 | 28 |
|
|
This socket will send out the mix signal to a pair of headphones.
4.8 MAIN MIX OUTPUT Connectors | 28 |
The stereo output is supplied with 1/4" TRS sockets, which is used to send the audio signal to an amplifier.
Through the main mix level control, you can adjust the output level from 
11