Nilfisk-ALTO AMX-120 user manual Technical Specification

8. TECHNICAL SPECIFICATION

Mono input channels

	Microphone input	electronically balanced, discrete input configuration
	Frequency response	10Hz to 55kHz, +						3dB
	Distortion (THD & N)	0.005% at +4dBu, 1kHz
	Gain range	0dB to 44dB (MIC)
	SNR (Signal to Noise Ratio)	115dB
	Line input	electronically balanced
	Frequency response	10Hz to 55kHz, +						3dB
	Distortion (THD & N)	0.005% at +4dBu, 1kHz
	Sensitivity range	+15dBu to			30dBu
Stereo input channels
	Line input	Balanced
	Frequency response	10Hz to 55kHz, +						3dB
	Distortion (THD & N)	0.005% at +4dBu, 1kHz
Impedances
	Microphone input	1.4kOhm
	All other inputs	10kOhm or greater
	Tape out	1kOhm
	All other output	120Ohm
Equalization
	Hi shelving	+	15dB @12kHz
	Mid bell	+	12dB @2.5kHz
	Low shelving	+	15dB @80Hz
	Low Cut filter	75Hz, 18dB/oct.
Main Mix Section
	Noise (Bus noise)	Fader 0 dB, channels muted:								100dBr (ref.:+4dBu)
		Fader 0dB, all input channels assigned and set to
		UNITY gain:				90dBr (ref.:+4dBu)
	Max output	+22dBu unbalanced, 1/4" jacks
	AUX Sends max out	+22dBu
Power supply (AC/AC Adaptor)
	Main voltage	USA/Canada			100				120V~, 60Hz
		Europe					210		240V~, 50Hz
		U.K./Australia					240V~, 50Hz
	Power Consumption	11 watts
Physical
	Dimension (W D H)	208mm 275.5mm 35/43mm
		(6.06"		7.81"	1.01"/1.30")
	Net weight	1.65Kg (3.65lb)
	Shipping weight	2.3Kg (5.11lb)

17