ETA-ECS6RM KEY Features, ECM Modules KEY Features

ETA-ECS6RM

Electrical Control Sequencer

ETA-ECS6RM KEY FEATURES

•6 Sequencer Timing Sections, 1,3, or 6 Second Intervals

•6 Independent ECM Connections

•6 Independent Contact Closures

•Front Panel Digital AC Mains Voltage and Current Meter

•Font & Rear Mounted XLR Connector for 12VDC Gooseneck LED Lamp

•Qty 1 Atlas Power AP-GNL18 LED Gooseneck Lamp Included

•External Switch Sequence Trigger Activation

•External DCV Sequence Trigger Activation 5–24VDC

•Abnormal AC Line Voltage Indicator for Voltages Between 101VAC–107VAC or 128VAC–132VAC

•Extreme Voltage Shutdown (EVS) Below 101VAC or Above 132VAC Line

ECM MODULES KEY FEATURES

•Manual/Auto On/Off switch

•Incoming AC present LED

•Active LED

•AC Fault LED

•Clamping Spike & Surge Suppression EVS Circuitry

•AC Mains Voltage & Current monitoring (Voltage only for ETA-ECM20)

•EMI & RFI Filtering (Not in ETA-ECM20)

APPLICATIONS

The ETA-ECS6RM was designed to be flexible with features that allow it to be used in a variety of applications. The sequenced outputs allow the turning of equipment On and Off in a particular order, to eliminate an in rush of current and audible pops that often occur with non-sequenced power strips. It also can be used solely for protection against voltage surges. If fuzzy video or frequent static pops occur, the AC power conditioning will eliminate or reduce those inconveniences. The following are just a few examples of applications in which the ETA-ECS6RM can be used:

•Restaurants

•Houses of Worship

•Schools

•Home Theaters

•Office Buildings

•Sports Bars

•Industrial Facilities

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

– 6 –

ETAsys.com

Specifications are subject to change without notice.