Multiquip manual MTR-35HS Rammer Specifications

Page 10

SPECIFICATIONS

Table1. MTR-35HS Rammer Specifications

MODEL	MTR-35HS U.S. (metric)

Overall Height	41.5 in. (1,055 mm)

Overall Width	14.1 in. (360 mm)

Over Length	21.5 in. (545 mm)

Shoe Size	5.9 X 10.6 in. (150 X 270 mm)

Blows/minute	720~750

Tamping Area	1,453 sq. ft. per hr (135 sq.m per hr)

Impact Force	1212 lbs./blow (550 kg/blow)

Clutch	Automatic Centrifugal

Operating Weight	90 lbs. (41 kg)

Table 2. ROBIN EC-08HS Engine Specifications

MODEL	ROBIN EC-08HS ENGINE

Type	Air-Cooled 2 Stroke Gasoline Engine

Bore X Stroke	1-31/32 in. X 1-7/32 in. ( 50 mm X 40 mm

Piston Displacement	5.12 cu.in. (78.5 cc)

Compression Ratio	6.5 : 1

Continuous Rated Output	1.8 hp/ 4,000 rpm

Max. Output	3.3 hp/5,500 rpm

Max. Torque	3.7 ft-lb 3,600 rpm (0.551 kg-m/3,600 rpm)

Cooling System	Air-Cooled By Fan

Lubrication System	Fuel-Lubrication Oil Spraying System

Fuel Consumption	0.84 lb/hp/h (2.2hp/4,500 rpm)

Fuel	Gasoline

Spark Plug	NGK B-6HS

Starting System	Recoil Starter

NOTE

Specifications are general and are subject to change without notice. If exact measurements are required, equipment should be weighed and measured.

PAGE 10 — MTR-35HS — OPERATION & PARTS MANUAL — REV. #5 (11/09/04)

Image 10

Contents Tamping Rammer Model MTR-35HS 2 MTR-35HS Operation & Parts Manual REV. #5 11/09/04 Heres HOW to GET Help Table of Contents Parts Ordering Procedures UPS Ground Service at no charge for freightGeneral Safety Rules for Safe OperationTransporting Maintenance SafetyEmergencies Operation and Safety Decals Construction of Tamping Rammer General InformationDefinition of Tamping Rammer Rammer Gearbox and Spring CylinderSpecifications MTR-35HS Rammer SpecificationsMTR-35HS Controls and Components Prior to starting the operation MTR-35HS OperationEngine Inspection Initial Start-upDrain Plug Operation Throttle Lever Full OpenMaintenance 200 300 Hours Pre-CleanerYearly MTR-35HS MaintenanceLong Term Storage MTR-35HS -TROUBLESHOOTING Guide Engine Troubleshooting18 MTR-35HS Operation & Parts Manual REV. #5 11/09/04 MTR-35HS Operation & Parts Manual REV. #5 11/09/04 Explanation of Code in Remarks Column Items Found In the Items Number ColumnMTR-35HS Suggested Spare Parts MTR-35HS Nameplate and Decals Part Name QTY. Remarks MTR-35HS Crankcase and Engine Assy Crankcase & Engine Assy MTR-35HS Guide Cylinder and Foot Assy Guide Cylinder & Foot Assy MTR-35HS -TANK and Handle Assy Part Name MTR-35HS Narrow Foot Andtrench Shoe ASSY. Option Foot Assy B Robin EC-08HS Engine Crankcase and Cylinder Assy Robin EC-08HS Engine Crankcase and Cylinder Assy Robin EC-08HS Engine Crankshaft and Piston Assy Crank Shaft Governor Assy Robin EC-08HS Engine Governor Assy Robin EC-08HS Engine Muffler Assy Muffler Robin EC-08HS Engine Carburetor and OIL Pump Assy Robin EC-08HS Engine Carburetor and OIL Pump Assy Robin EC-08HS Engine Recoil Starter and Blower Assy FAN Cover Robin EC-08HS Engine AIR Cleaner Assy Element Robin EC-08HS Engine Carburetor Components Assy Robin EC-08HS Engine Carburetor Components Assy NeedleRobin EC-08HS Engine Recoil Starter Components Assy Spiral Spring Robin EC-08HS Engine Magneto Assy Flywheel Terms and Conditions of Sale Parts MTR-35HS Operation & Parts Manual REV. #5 11/09/04 WWWmultiquip.com