INSTALLATION INSTRUCTIONS
THE FOLLOWING SECTION LISTS THE INSTALLATION REQUIREMENTS AND REGULATIONS
A competent person in accordance with the current Gas Safety (Installation and Use) Regulations or the rules in force and in accordance with the manufacturer’s instructions must install the appliance; failure to do so could lead to prosecution.
The following are the relevant Codes of Practice and British Standards.
The Building Regulations issued by the Department of the Environment. The Building Standards (Scotland) (Consolidation) Regulations issued by the Scottish Development Department.
BS 8303 | Pt 2 1994 | BS 5440 Pt. 1 1990 & Pt. 2 1989 |
BS 1251 | 1987 | BS 5871 Pt. 2 1991 & Pt. 3 1991 |
BS 6891 | 1988 | BS 6461 Pt. 1 1984 |
BS 715 1993 | BS 1289 Pt. 1 1986 | |
BS 7566 Pts. |
|
Technical Data |
|
Overall height of fire with spacer | = 612mm |
Overall height of fire without spacer | = 605mm |
Minimum height of opening required | = 540mm |
Maximum height of opening with spacer | = 590mm |
Maximum width of opening required | = 405mm |
Maximum width of opening with spacer | = 470mm |
Forward projection from opening | = 60mm |
(without front and fret) |
|
Forward projection from opening with | = 105mm |
spacer (without front and fret) |
|
Depth behind opening without spacer | = 190mm |
Depth behind opening with spacer | = 145mm |
(See page 18 for diagram) |
|
TYPE OF GAS G20 only |
|
Supply Pressure 20 mbar +/- 1 mbar (Cold) |
|
GAS INPUTS |
|
Max 6.6 kW (22520 Btu/h) |
|
Min 3.6 kW (12300 Btu/h) |
|
Pilot 0.26 kW (890 Btu/h) |
|
Main Injector Type |
|
Stereomatic | 046/19/196/74M |
Gas valve | Concentric TESA 3058/S |
Pilot | OP |
GAS CONNECTION | 8MM OD Tube |
WEIGHT |
|
12.5 kg (without front and fret) |
|
Page 4