Athena Technologies A88028 manual Introduction, General Installation Requirements, Technical Data

Page 3

INTRODUCTION

NO COMPONENT OF THIS FIRE IS MANUFACTURED FROM ASBESTOS OR ASBESTOS RELATED PRODUCTS.

The ATHENA L.F. is an open fronted inset live coal effect gas fire specially designed for Pre-Cast Flue application and is also suitable for use with Brick Chimneys, twin walled or insulated Metal/Pre-fabricated Flues of 125mm minimum diameter and Flueboxes conforming to the constructional requirements of BS 715. It is fitted with a combined flame supervision and oxygen depletion monitoring device. The fire is for hearth mounting only on a non-combustible hearth. The fire is for use on Natural Gas only.

GENERAL INSTALLATION REQUIREMENTS

In your own interest and that of safety, it is the law that all gas appliances are installed by competent persons in accordance with the current Gas Safety (Installation and Use) Regulations. Failure to install appliances correctly could lead to prosecution.

The installation MUST be in accordance with these installation instructions, all the relevant parts of the Local and National Building Regulations or Building Standards (Scotland) (Consolidation) Regulations and the relevant recommendations of the current editions of the following British Standards:

B.S. 5871 : Part 2

B.S. 5440 : Parts 1 & 2

B.S. 6891

B.S. 6461 : Parts 1 & 2

B.S. 715

B.S. 1251

B.S. 1289 : 1975

B.S. 1289 : Part 1 : 1986

B.S. 1289 : Part 2 : 1989

Any other relevant British Standard Code of Practice and/or Local Building Regulations and in accordance with the rules in force.

1.0 TECHNICAL DATA

1.1 DIMENSIONS

 

(Overall)

mm

Height

682

Width

635

Depth

115

Forward Projection

100

Height to top of flue aperture

529

Weight

18 Kg

1.2INPUTS AND PRESSURES

Maximum Heat Input (Gross)

6.0 kW

20470 Btu/h

Minimum Heat Input (Gross)

2.3 kW

7848 Btu/h

Supply Pressure

20.0 mbar

 

Setting Pressure Cold

13.0 mbar ± 1mbar

Gas Rate Adjustment

NONE

 

1.3BURNER AND CONTROL DETAILS

Main Burner

ÿ 992174

Pilot Burner

SIT OP 9063

Injector (Main Burner)

Bray Cat 82/440

Ignition

Battery Operated Electronic Ignition. Battery Size 9V MN1604 or 6LR61

Control Tap

Concentric (with FSD) Model Number TESA 2762-025

Spark Gap

3.0mm to 5.0mm

Control Knob Settings

OFF, HIGH, MED, ECON, PILOT

3

Image 3
Contents For USE with Natural GAS only Athena LF Athena LFContents Layout General Installation Requirements Technical DataIntroduction Conditions of Installation Check the Flue for Good Draught AS Detailed in Section PRE-CAST Flue of Minimum Size FigFreestanding GAS Flue BOX Selkirk Code Metal Flue BOX/125mm Diameter Flues Figs a and 3BInstallation of Fire FIT Mounting EYE Screws Method of InstallationImportant Notes Fixing by Tension CableFront Connection Fixing Directly to Surround FaceGAS Connection Concealed ConnectionCommissioning Install Fuel Effect ComponentsFIT Outer Case Check GAS PressureTest for Spillage Check IgnitionCheck Operation of FSD Servicing Instructions Instruct UserMain Burner Pilot AssemblyIgnition Battery Replacement Fuel Effect ComponentsHints on Fault Finding Ignition Micro SwitchThermocouple Break Micro Switch Description Short List Parts