Vermont Casting VCS5027 Secure Shelves Parts Required, Secure Side Shelf to Grill Parts Required

Page 22

VCS4007 / VCS4017 / VCS4027 / VCS4037 / VCS5007 / VCS5017 / VCS5027 / VCS5037 Assembly

Step 6: Secure Shelves

Parts Required:

(4)10-24 x 1/2” Bolts (black)

A.Secure each Shelf by inserting (2) 10-24 x 1/2” bolts through the U-Clip fasteners as shown in the diagram.

B.Tighten the four (4) Shelf Support bolts from Step 4 to secure the shelf supports to the grill body.

Repeat Steps 5 & 6 for the opposite side of the grill.

Fig. 6

 

A.

 

Insert

B.

Bolts

Tighten

 

 

Bolts

Step 7: Secure Side Shelf to Grill

Parts Required:

(3) 10-24 x 1/2” Bolts (black)

Lift the grill lid and insert two (2) #10-24 x 1/2” bolts, shown as “a” and “b” in Fig. 7, to further secure the Shelf Right - S/B to the grill body. Be sure to fully tighten the bolts before proceeding to the next step.

Next: Repeat Step 7 on the opposite side of the grill’s interior to secure the Shelf Left - Solid to the grill body by inserting only one (1) #10-24 x 1/2” bolt in the “b” location as shown in the illustration.

Bolt “a”

Bolt “b”

Fig. 7

Step 8: Secure Condiment Tray to Console

Parts Required:

(2)#10-24 x 1/2” Bolts (stainless)

(2)#10-24 Nuts (black)

Secure the Left Condiment Tray to the Console using a #10-24 x 1/2” stainless bolt and a #10-24 nut. Make sure the holes of the Condiment Tray and the Console are aligned. Reach underneath the console and hold the nut in place with one finger and insert the bolt from the outside as shown in Fig. 8 and tighten until they are securely fastened.

Next: Repeat Step 5 to secure the Right Condiment Tray to the opposite side of the console.

Bolt

Nut

Fig. 8

Page 4

Page 21 Page 23
Image 22
Page 21 Page 23
Contents USER’S Manual for Models Page Signal Words Safe Locations for USE of this Outdoor Grill Safe USE of LP Propane GAS Safe USE of Natural GASElectrical Safety Prevention of BurnsFuels Additional Warnings Safety For Your Safety LP Propane GAS Supply Connection Gas HookupNatural GAS Supply Connection To Connect To DisconnectControl Functions Propane Tank Valve Activating the Igniter Electronic Ignition SystemLighting the Main Burners FLARE-UPS Turning the Burners OFFMatch Lighting the Main Burners To Start the Rotisserie Burner Match Lighting the Rotisserie BurnerRotisserie Setup if equipped Lighting the Side Burner if equipped Shutting the Burner OFFTroubleshooting Guide Troubleshooting Guide Assembly Procedures Unpack Carton and Verify ContentsInstall the Casters Install U-Clip Fasteners Parts RequiredInstall the Side Shelf Supports Parts Required Attach Shelves Parts RequiredSecure Side Shelf to Grill Parts Required Secure Shelves Parts RequiredSecure Condiment Tray to Console Parts Required Attach Knobs Parts Required Attach Side Burner Lid S/B-Single Parts RequiredRemove the Packing Tape Attach the Handle to the Door Parts Required Install the Grease Cup and Grease Pan Parts RequiredAttach Stabilizer Bracket Parts Required Install the Internal Components Parts Required Install the BatteryInstall the LP Cylinder LP Models Only Parts Required

VCS5027 specifications

The Vermont Casting VCS5027 is a highly regarded wood-burning stove known for its impressive heating capabilities, aesthetic appeal, and innovative technology. Designed to provide warmth and comfort to homes, this model combines traditional craftsmanship with modern efficiency.

One of the primary features of the VCS5027 is its high-efficiency heating system. With an EPA-certified design, it adheres to strict emissions standards, ensuring that it burns cleaner and more efficiently than many traditional wood stoves. This model can produce an impressive amount of heat, making it suitable for heating larger spaces or entire homes, while also reducing fuel consumption.

The VCS5027 is built with heavy-duty cast iron construction, which not only enhances durability but also provides excellent heat retention. This material allows the stove to distribute warmth evenly and maintain its temperature for extended periods, even after the fire has diminished. The cast iron body, along with the stainless steel components, gives the stove a timeless look that complements various interior styles.

Another standout feature of the VCS5027 is its air wash system. This innovative technology helps keep the glass door clean by directing air across the surface, reducing soot buildup and allowing for a clear view of the fire within. The large ceramic glass window offers a panoramic view of the flames, enhancing the overall ambiance of any room.

Moreover, the Vermont Casting VCS5027 incorporates a secondary combustion system, which maximizes heat output while minimizing smoke emissions. This system enhances the efficiency of the stove by igniting gases and particulates produced during the burning process, resulting in a cleaner burn and reduced environmental impact.

Ease of use is another essential characteristic of the VCS5027. It is designed with user-friendly controls, allowing users to adjust the airflow and heat output with minimal effort. Additionally, the stove features a straightforward loading design, making it easy to add wood as necessary.

In summary, the Vermont Casting VCS5027 wood-burning stove stands out for its combination of efficiency, durability, and aesthetic appeal. With its high-efficiency heating, sturdy cast iron construction, air wash technology, and user-friendly design, it offers both functionality and a classic look. Whether for a cozy cabin or a family home, the VCS5027 promises to deliver warmth and charm for years to come.
Top Page Image Contents