Vermont Casting VCS5027 Attach Side Burner Lid S/B-Single Parts Required, Remove the Packing Tape

Page 23

VCS4007 / VCS4017 / VCS4027 / VCS4037 / VCS5007 / VCS5017 / VCS5027 / VCS5037 Assembly

Step 9: Attach Side Burner Lid (S/B-Single)

Parts Required:

(1)Side Burner Lid (S/B-Single)

(2)#10-24 x 3/4” ( 1/4” Shank)*

*Included with the Side Burner Kit

Attach the lid marked (S/B-Single) to the Shelf Right top marked VM-S/B using two #10-24 x 3/4” ( 1/4” Shank) bolts. Align the holes at the back sides of the lid with the holes located in the shelf top and insert a bolt in each.

Note: If your unit is equipped with a side burner, please refer to the instruction sheet included with the side burner for installation instructions.

Bolts

Fig. 9

Step 10: Attach Knobs

 

Parts Required:

 

VCS4007: (5) Knobs

VCS5007: (6) Knobs

VCS4017: (5) Knobs

VCS5017: (6) Knobs

VCS4027: (5) Knobs

VCS5027: (6) Knobs

VCS4037: (5) Knobs

VCS5037: (6) Knobs

Note: Depending upon your specific model, your grill may require 5 or 6 knobs. Models VCS4007, VCS4017, VCS4027, & VCS4037 are equipped with five (5) knobs, and models VCS5007, VCS5017, VCS5027 & VCS5037 are equipped with six (6) knobs.

Fig. 10

Align the knobs on the valve stems and push inward until the knob sits snugly on the stem.

Step 11: Remove the Packing Tape

Remove the Packing Tape from: The Grease Cup

The Base Assembly (inside the grill) The Warming Rack

Note: For models VCS5007, VCS5017, VCS5027 & VCS5037, remove the Packing Tape from the front pull- out drawer.

Fig. 11

Page 5

Image 23
Contents USER’S Manual for Models Page Signal Words Safe Locations for USE of this Outdoor Grill Safe USE of Natural GAS Safe USE of LP Propane GASPrevention of Burns Electrical SafetyFuels Additional Warnings Safety Gas Hookup For Your Safety LP Propane GAS Supply ConnectionTo Disconnect Natural GAS Supply Connection To ConnectActivating the Igniter Electronic Ignition System Control Functions Propane Tank ValveLighting the Main Burners Match Lighting the Main Burners Turning the Burners OFFFLARE-UPS Match Lighting the Rotisserie Burner To Start the Rotisserie BurnerRotisserie Setup if equipped Shutting the Burner OFF Lighting the Side Burner if equippedTroubleshooting Guide Troubleshooting Guide Unpack Carton and Verify Contents Assembly ProceduresInstall U-Clip Fasteners Parts Required Install the CastersAttach Shelves Parts Required Install the Side Shelf Supports Parts RequiredSecure Condiment Tray to Console Parts Required Secure Shelves Parts RequiredSecure Side Shelf to Grill Parts Required Remove the Packing Tape Attach Side Burner Lid S/B-Single Parts RequiredAttach Knobs Parts Required Attach Stabilizer Bracket Parts Required Install the Grease Cup and Grease Pan Parts RequiredAttach the Handle to the Door Parts Required Install the Battery Install the Internal Components Parts RequiredInstall the LP Cylinder LP Models Only Parts Required

VCS5027 specifications

The Vermont Casting VCS5027 is a highly regarded wood-burning stove known for its impressive heating capabilities, aesthetic appeal, and innovative technology. Designed to provide warmth and comfort to homes, this model combines traditional craftsmanship with modern efficiency.

One of the primary features of the VCS5027 is its high-efficiency heating system. With an EPA-certified design, it adheres to strict emissions standards, ensuring that it burns cleaner and more efficiently than many traditional wood stoves. This model can produce an impressive amount of heat, making it suitable for heating larger spaces or entire homes, while also reducing fuel consumption.

The VCS5027 is built with heavy-duty cast iron construction, which not only enhances durability but also provides excellent heat retention. This material allows the stove to distribute warmth evenly and maintain its temperature for extended periods, even after the fire has diminished. The cast iron body, along with the stainless steel components, gives the stove a timeless look that complements various interior styles.

Another standout feature of the VCS5027 is its air wash system. This innovative technology helps keep the glass door clean by directing air across the surface, reducing soot buildup and allowing for a clear view of the fire within. The large ceramic glass window offers a panoramic view of the flames, enhancing the overall ambiance of any room.

Moreover, the Vermont Casting VCS5027 incorporates a secondary combustion system, which maximizes heat output while minimizing smoke emissions. This system enhances the efficiency of the stove by igniting gases and particulates produced during the burning process, resulting in a cleaner burn and reduced environmental impact.

Ease of use is another essential characteristic of the VCS5027. It is designed with user-friendly controls, allowing users to adjust the airflow and heat output with minimal effort. Additionally, the stove features a straightforward loading design, making it easy to add wood as necessary.

In summary, the Vermont Casting VCS5027 wood-burning stove stands out for its combination of efficiency, durability, and aesthetic appeal. With its high-efficiency heating, sturdy cast iron construction, air wash technology, and user-friendly design, it offers both functionality and a classic look. Whether for a cozy cabin or a family home, the VCS5027 promises to deliver warmth and charm for years to come.