Vermont Casting VCS5027 user manual Attach the Handle to the Door Parts Required

Page 24
Page 6

VCS4007 / VCS4017 / VCS4027 / VCS4037 / VCS5007 / VCS5017 / VCS5027 / VCS5037 Assembly

Step 12: Attach the Handle to the Door

Parts Required:

VCS4007/VCS4017/VCS4027/VCS4037: (1) Handle

VCS5007/VCS5017/VCS5027/VCS5037: (3) Handles

Note: Handles may not appear exactly as shown in diagram

Attach the Door handle(s) to the door(s) by aligning the handles over the holes and inserting the screws that were supplied with the handles through the door panel and into the handles. For models VCS5007,VCS5017,VCS5027

&VCS5037, attach the drawer handle using the same method.

Note: If doors are not aligned or have shifted during shipping, they can be adjusted by loosening the screws which fasten the hinge of the door to the grill body and shifting the doors until they are aligned. Once satisfied with alignment, fully tighten the screws to secure the doors into position.

Step 13: Install the Grease Cup and Grease Pan

Parts Required:

(1)Grease Cup

(1)Grease Pan

Install the Grease Cup into the cut-out in the Upper Base Panel located underneath the grill. It is accessible from the back of the grill. Once the Grease cup is in place, move the Grease pan into position above it by placing the side edges onto the support rails and sliding it into place.

Fig. 13

Note: Make sure the funnel opening of the grease pan is positioned over the Grease Cup.

Step 14: Attach Stabilizer Bracket

Parts Required:

(2)#10-24 x 1/2” Bolts (black)

(1)Stabilizer Bracket

Attach the Stabilizer Bracket underneath the bottom panel by aligning the holes and inserting both #10-24 x 1/2” bolts through the panel and into the Stabilizer Bracket as shown in Fig. 14.

Stabilizer Bracket

Fig. 14

 

 

Page 23 Page 25
Image 24
Page 23 Page 25
Contents USER’S Manual for Models Page Signal Words Safe Locations for USE of this Outdoor Grill Safe USE of LP Propane GAS Safe USE of Natural GASElectrical Safety Prevention of BurnsFuels Additional Warnings Safety For Your Safety LP Propane GAS Supply Connection Gas HookupNatural GAS Supply Connection To Connect To DisconnectControl Functions Propane Tank Valve Activating the Igniter Electronic Ignition SystemLighting the Main Burners Turning the Burners OFF FLARE-UPSMatch Lighting the Main Burners To Start the Rotisserie Burner Match Lighting the Rotisserie BurnerRotisserie Setup if equipped Lighting the Side Burner if equipped Shutting the Burner OFFTroubleshooting Guide Troubleshooting Guide Assembly Procedures Unpack Carton and Verify ContentsInstall the Casters Install U-Clip Fasteners Parts RequiredInstall the Side Shelf Supports Parts Required Attach Shelves Parts RequiredSecure Shelves Parts Required Secure Side Shelf to Grill Parts RequiredSecure Condiment Tray to Console Parts Required Attach Side Burner Lid S/B-Single Parts Required Attach Knobs Parts RequiredRemove the Packing Tape Install the Grease Cup and Grease Pan Parts Required Attach the Handle to the Door Parts RequiredAttach Stabilizer Bracket Parts Required Install the Internal Components Parts Required Install the BatteryInstall the LP Cylinder LP Models Only Parts Required

VCS5027 specifications

The Vermont Casting VCS5027 is a highly regarded wood-burning stove known for its impressive heating capabilities, aesthetic appeal, and innovative technology. Designed to provide warmth and comfort to homes, this model combines traditional craftsmanship with modern efficiency.

One of the primary features of the VCS5027 is its high-efficiency heating system. With an EPA-certified design, it adheres to strict emissions standards, ensuring that it burns cleaner and more efficiently than many traditional wood stoves. This model can produce an impressive amount of heat, making it suitable for heating larger spaces or entire homes, while also reducing fuel consumption.

The VCS5027 is built with heavy-duty cast iron construction, which not only enhances durability but also provides excellent heat retention. This material allows the stove to distribute warmth evenly and maintain its temperature for extended periods, even after the fire has diminished. The cast iron body, along with the stainless steel components, gives the stove a timeless look that complements various interior styles.

Another standout feature of the VCS5027 is its air wash system. This innovative technology helps keep the glass door clean by directing air across the surface, reducing soot buildup and allowing for a clear view of the fire within. The large ceramic glass window offers a panoramic view of the flames, enhancing the overall ambiance of any room.

Moreover, the Vermont Casting VCS5027 incorporates a secondary combustion system, which maximizes heat output while minimizing smoke emissions. This system enhances the efficiency of the stove by igniting gases and particulates produced during the burning process, resulting in a cleaner burn and reduced environmental impact.

Ease of use is another essential characteristic of the VCS5027. It is designed with user-friendly controls, allowing users to adjust the airflow and heat output with minimal effort. Additionally, the stove features a straightforward loading design, making it easy to add wood as necessary.

In summary, the Vermont Casting VCS5027 wood-burning stove stands out for its combination of efficiency, durability, and aesthetic appeal. With its high-efficiency heating, sturdy cast iron construction, air wash technology, and user-friendly design, it offers both functionality and a classic look. Whether for a cozy cabin or a family home, the VCS5027 promises to deliver warmth and charm for years to come.
Top Page Image Contents