Viking TruSearTM manual LP/PROPANE Fixed Piping Connection

Page 5

LP/PROPANE FIXED PIPING CONNECTION

Connection:

Standard Residential 1/2” ID gas service line - 1/2” NPT male with 3/8” flare adapter.

Operating Pressure:

10.0” W.C.P. LP/Propane

Supply Pressure:

11” to 14” W.C.P. LP/Propane If in excess of 14” W.C.P., a step-down regulator is required.

Check with your local gas utility company or with local codes for instructions on installing gas supply lines. Be sure to check on type and size of run and how deep to bury the lines. If the gas line is too small, the grill will not function properly.

To connect the supplied regulator assembly to the incoming flexible gas line, attach with a 3/8” female flare adapter to the 3/8” male flare adapter to the regulator assembly. Ensure that the regulator arrow points in the direction of the gas flow towards the unit and away from the supply. Attach the regulator assembly to the grill unit with the 3/8” female flare adapter on the regulator assembly to the 3/8” male flare adapter on the grill.

DO NOT forget to place the installer supplied gas valve in an accessible location.

3/8” female flare adapter

Regulator

3/8” Male flare adapter

3/8” male flare adapter

Regulator Assembly

Installer supplied flexible gas line with 3/8” female flare adapter or Viking GHS12

Installer supplied shut-off valve must be easily accessible

5

Image 5
Contents Viking Use/Installation Guide General Information Safety TipsPlease Read and Follow GAS Connection Basic SpecificationsBurner Adjustment Natural Fixed Piping Connection LP/PROPANE Fixed Piping Connection LP/PROPANE Tank Requirements LP/PROPANE Tank ConnectionLeak Testing Installation Procedures for BUILT-IN Installation Performance Checklist BUILT-IN Clearance DimensionsTo light TruSear infrared griller Before Lighting Your Truseartm Infrared GrillerTruSear Infrared Cooking Chart Replacement Parts Cleaning and MaintenanceViking Preferred Service Service InformationProfessional Series Page PS0606VR