Meco 67c3c8kk81 manual Step Front Crossbar and Caster Cap Assembly

7

Step 5

Front Crossbar and Caster Cap Assembly

A.Attach the Front Crossbar between the Front Legs with four 1/4-20 x 1.50” bolts. Insert the bolts throught he out- side of the legs and into the threaded holes in the crossbar ends. Front crossbar should be oriented with the open side facing the inside of the cabinet and the hinge pin hole on the bottom.

B.Install the Caster Caps on the exposed threaded stems of the front casters.

1/4-20 x 1.50” Bolt set

4 pc

A

B

Step 6

Door handle Assembly and Door Installation

A. Attach Handle to Door with two 5/32 x .22” Bolts. (Note: One extra bolt included)

B. Install Door. Drop bottom door pin into hole in front right corner of Bottom Shelf. Swing top of Door toward hole in underside of Front Crossbar. Depress spring-loaded pin with thumb while sliding pin into crossbar hole until it snaps into place.

5/32 x .22” Bolt set

2 pc