Cisco Systems 512, 612

Chapter 4 Installing Hardware Options

Installing DIMMs

4-8

Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide

OL-9137-02

Caution When you handle static-sensitive devices, take precautions to avoid damage from

static electricity.

To install a DIMM, follow these steps:

Step 1 Review the safety information in the “Safety Guidelines” section on page 2-4.

Step 2 Power off the device and peripheral devices. Disconnect the power cord, and then

disconnect all external cables. Remove the cover. (See the “Removing the Cover

and Bezel” section on page 4-1 for details.

Step 3 Touch the static-protective package that contains the DIMM to any unpainted

metal surface on the device, and then remove the DIMM from the package.

Step 4 Install the DIMM:

a. Open the retaining clip on each end of the DIMM connector. Turn the DIMM

so that the pins align correctly with the connector. (See Figure 4-5.)

Figure 4-5 Installing a DIMM

1DIMM 1 2DIMM 3

151929