4-7
Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide
OL-9137-02
Chapter 4 Installing Hardware Options
Installing DIMMs
• Memory modules are installed on the system board in the DIMM connectors
shown in Figure 4-4. Devices with a single DIMM should have the module
installed in DIMM connector 1. Install the next module in DIMM
connector 3. The third and fourth DIMMs must be installed as a pair in
DIMM connectors 2 and 4.
• When you install or remove DIMMs, the WAE appliance automatically
detects the new DIMM configuration and no save in the BIOS is required.
Figure 4-4 shows the location of the system-board connectors for installing
DIMMs.
Figure 4-4 System Board DIMM Connectors
1DIMM 1 2DIMM 2
3DIMM 3 4DIMM 4
159094
4
3
2
1