Cisco Systems 512, 612

Chapter 3 Installing the Cisco Wide Area Application Engine

Installing the Cisco Wide Area Application Engine

3-8

Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide

OL-9137-02

Figure 3-6 Attaching the Slide Rail to the Front Mounting Flange—Left

Front Rail Shown

Step 5 Repeat these steps for the right slide rail. Make sure that you attach the second

slide rail at the same rack height as the first one so that the chassis will be level

in the rack.

Step 6 To install the chassis in the rack, align the chassis on the slide rails and push the

chassis fully into the rack. Secure the chassis to the front mounting flanges with the

captive thumbscrews (labeled 1 in Figure 3-7).

Note You must leave the shipping brackets (labeled 2 in Figure 3-7) attached to

the slide rails unless the shipping brackets impede the chassis from

sliding fully into the rack. If you need to remove the shipping brackets,

continue with Step 7.

1Pins 2Latch tab

3Slide rail pin bracket

Pins extended through

the mounting flange and

slide rail pin bracket

Pins not extended

through the mounting

flange and slide rail

pin bracket

134405