Operating instructions
What to do, when ...
Try to rectify minor faults on the dishwasher with the aid of the instructions given here. If you call in customer service to resolve one of the malfunctions listed here, or rectify an error made in the operation of the appliance, the customer service engineer’s visit is not free of charge, even during the period of guarantee.
...Error Messages Are Displayed.
•If the programme indicator for the selected wash programme is flashing or fault code (2 is displayed on the
After rectifying this fault, press the button for the wash programme that has been started. The wash programme continues. If the fault code is displayed again, contact customer service.
•For all other faults, please contact customer service, stating the fault code.
Malfunction | Possible Cause | Remedy | |
The programme indica- | Tap is closed. | Open tap. | |
tor for the selected | The filter in the threaded | Clean the filter in the | |
wash programme is | |||
hose fitting is blocked. | threaded hose fitting. | ||
flashing: | |||
|
| ||
there is no water run- | The water inlet hose is not |
| |
ning into the dish- | Check hose installation. | ||
correctly laid. | |||
washer. |
| ||
|
| ||
|
|
| |
Fault code (2 is dis- | The siphon is blocked. | Clean siphon. | |
played on the multi- |
|
| |
display. |
|
| |
The programme indica- | The water drain hose is not | Check hose installation. | |
tor for the selected | correctly laid. | ||
wash programme is |
| ||
|
| ||
flashing. |
|
| |
Fault code (3 is dis- | The leak prevention system | Close the tap and contact | |
played on the multi- | |||
has been triggered. | customer service. | ||
display. | |||
|
| ||
|
|
|
26
