Operating instructions
Adjust the water softener
To avoid the scale deposits on the dishes and in the dishwasher, the dishes must be washed with soft, i.e. low lime content, water. The dish- washer therefore has a
3You water supplier will be able to inform you on the hardness and hardness range of the water in your area.
0Adjust the water softener to the setting given in the table that corre- sponds to the hardness of the water in your area. The water softener can be adjusted in 10 steps.
| Water Hardness |
| Adjust | Indication on the | ||
in °d1) |
| in mmol/l 2) | Range | to Hardness Setting | ||
|
|
| 9 | H 9 | ||
|
|
| ||||
|
|
| 8 | H 8 | ||
|
| IV | 7 | H 7 | ||
|
|
| 6 | H 6 | ||
|
|
| 5 | H 5 | ||
|
| III | 4 | H 4 | ||
|
| 3* | H 3 | |||
|
|
| ||||
|
|
|
|
|
|
|
|
| II | 2 | H 2 | ||
|
| I/II | 1 | H 1 | ||
under 4 |
| under 0.7 |
| I | 0 | H 0 |
|
| no salt necessary | ||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
1)(°d) German degree, measure of the hardness of water
2)(mmol/l) millimol per litre, international unit for the hardness of water *factory setting
01. Hold the water softener button pressed and press the ON/OFF switch M. The
2.Pressing the water softener button increases the hardness setting by 1. (Exception: hardness setting 0 follows hardness setting 9).
3.When the hardness setting is correct, press the ON/OFF switch M. The hardness setting is then saved.
10